Miele G 7823, G 7824 operating instructions Mobile units, modules and inserts

Page 55

Maintenance

Mobile units, modules and inserts

Mobile units, modules and inserts should be checked daily to make sure they are functioning correctly. The washer-disinfector is supplied with a check list.

The following need to be inspected:

–Check that rollers on mobile units/ inserts are free of hindrance and that they are secure.

–Check that the mobile unit connector is at the correct height and screwed on correctly.

–Check that the locking caps in the module connectors of modular system mobile units are working properly.

–Check that jets, sleeves and hose adapters are securely held in position in mobile units/inserts.

–Check that wash liquor can flow unhindered through all jets, sleeves and hose adapters.

–Make sure caps and closures on sleeves are correctly located.

and where applicable:

–Make sure that the spray arms rotate freely.

–Make sure the spray arm jets are free of any blockages. See "Cleaning the spray arms".

–Make sure that there are no small metallic objects sticking to the magnetic strip on a mobile unit.

–Make sure the magnetic strip on mobile units with automatic mobile unit recognition is correctly screwed into position.

55

Image 55

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the applianceExamples of application areas Intended UseGuide to the machine Unclean sideGuide to the machine Clean side G 7824 only Display ControlsMinus button Door switch Start buttonService interface Programme selector Cursor button right Moves the cursor to the rightWater softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Then Run the reactivation programmeAutomatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit codingSet the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Orthovario kit Dispensing liquid chemical agentsAdditional optional DOS modules Oxivario kitFill the containers with the relevant agent Preparing the DOS dispensersDispensing liquid chemical agents Every 12-18 months Dispensing system maintenanceVenting the dispensing system External Dispensing systemsOperation Selecting or changing your own code Operating levelsFixed programme Starting a programmeFree programme selection AWK Automatic mobile unit recognition Programme sequenceCancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Periodic checks MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the door seals Cleaning the control panelCleaning the front of the machine Cleaning the wash cabinetMobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasDescription of the machine Special processes Oxivario and OrthovarioAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366