Miele T 4262 C operating instructions Select a programme, Low temperature, Start the programme

Page 12

How to dry correctly

D Select a programme

^Turn the programme selector to the required programme.

Low temperature

^For drying particularly sensitive fabrics (care symbol r) e.g. acrylics turn the programme selector to the Low temperature position.

Because the heater rating is reduced for the Low temperature setting clothes dry more slowly thus lengthening drying times.

E Start the programme

^Press the Start button.

The indicator lamp for the Start button will then change from flashing to being on constantly.

The drying cycle begins.

Depending on the programme selected, the drying stage reached is shown by the sequence indicator lamps on the right hand side of the control panel.

Before the end of a programme

The cooling down phase takes place before the end of a programme so that the garments are not too hot to handle (the Cool air indicator lamp will come on). The programme is not finished until the cooling down phase is complete. The Woollens handcare and Smoothing programmes do not include a cooling down phase.

At the end of a programme

The Anti-crease/Finishindicator lamp comes on.

The drum will continue to rotate at intervals to prevent laundry creasing, if you do not wish to remove it immediate- ly. The anti-crease phase lasts for an hour. There is no anti-crease phase on the Woollens handcare programme.

During the anti-crease phase . . .

. . . (depending on the programme selected) the indicator lamp for the drying stage reached will also light up.

. . . the buzzer will sound at intervals.

12

Image 12
Contents Operating instructions For condenser tumble dryer T 4262 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Consumption data Technical data Technical safety Correct usePage Operation Safety with children Using accessoriesDisposal of your old machine PC indicator light Control panelProgramme selector Programme sequence and check lampsCare symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerLow temperature Select a programmeStart the programme Changing the programme sequence Programme chart Automatic Timed dryingWarm air Cool airCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide General problemsProblem Possible cause Remedy There is a build Up of fluffLaundry is Not sufficientlyProblem Possible cause Remedy Drying process Even switches offGoes on too long or Check and fault indicator lamps Problem Possible cause Remedy Programme has Stopped,Has come on Sequence displayChanging the lamp After sales service Appliance guaranteeOptional accessories RepairsInstallation Front viewInstallation site Transporting the machine to its installation siteReplacing the lid Before moving the machine again e.g. when moving house Levelling the machineRoom in which the dryer is located Washer dryer stackSetting up the drain hose External condensed water outletConnection to a sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data SmoothingTechnical data Programmable functions for changing standard settings Programmable functions To checkProgrammable functions Activating and deactivating the buzzer Buzzer is deactivatedBuzzer is activated Extending the cooling down time Cooling down time will be five miinutes longerCooling down time will be ten minutes longer Cooling down time is not extendedStandard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505