Miele T 4262 C Problem Possible cause Remedy There is a build, Up of fluff, Laundry is, Dry

Page 23

Problem solving guide

Problem	Possible cause	Remedy
There is a build	Fluff is principally the result of	Fluff is collected by the fluff
up of fluff.	friction when garments are	filters and can be easily
	being worn and washed.	removed (see "Cleaning and
	Machine drying hardly	Care").
	causes any fluff to form and
	has been established by
	research institutes to have no
	appreciable effect on the
	lifetime of the garment.
The laundry is	The load consisted of	– Finish drying using "Warm
not sufficiently	different fabrics.	air" (timed drying).
dry.		– Select a more suitable
		drying programme next
		time (see "Programme
		chart").
The interior	The lighting switches off	Switch the dryer off and then
drum lighting	automatically (to save	on again.
does not come	energy).
on.	The lamp needs changing.	Change the lamp as
		described at the end of this
		section.

23

Image 23

Contents Operating instructions For condenser tumble dryer T 4262 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Consumption data Technical data Correct use Technical safetyPage Operation Disposal of your old machine Safety with childrenUsing accessories Programme sequence and check lamps PC indicator lightControl panel Programme selectorTips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryStart the programme Low temperatureSelect a programme Changing the programme sequence Programme chart Cool air AutomaticTimed drying Warm airEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit General problems Problem solving guideNot sufficiently Problem Possible cause Remedy There is a buildUp of fluff Laundry isGoes on too long or Problem Possible cause Remedy Drying processEven switches off Check and fault indicator lamps Sequence display Problem Possible cause Remedy Programme hasStopped, Has come onChanging the lamp Repairs After sales serviceAppliance guarantee Optional accessoriesFront view InstallationReplacing the lid Installation siteTransporting the machine to its installation site Washer dryer stack Before moving the machine again e.g. when moving houseLevelling the machine Room in which the dryer is locatedExternal condensed water outlet Setting up the drain hoseConnection to a sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Smoothing Consumption dataTechnical data Programmable functions for changing standard settings To check Programmable functionsProgrammable functions Buzzer is activated Activating and deactivating the buzzerBuzzer is deactivated Cooling down time is not extended Extending the cooling down timeCooling down time will be five miinutes longer Cooling down time will be ten minutes longerStandard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505