Miele T 4262 C Activating and deactivating the buzzer, Buzzer is deactivated, Buzzer is activated

Page 40

Programmable functions

Activating and deactivating the buzzer

A buzzer sounds (at intervals for a maximum of 1 hr) to let you know the programme has finished.

The machine is delivered with the buzzer activated but you can deactivate it if wished.

The buzzer will still sound if there is a fault, even if it has been deactivated.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

–The programme selector is at Finish.

APress the Start button and keep it pressed in whilst carrying out steps

B-C.

BSwitch the dryer on with the I-On/0-Offbutton.

CWait until the Start indicator lamp comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Cottons Hand iron position.

FPressing the Start button switches between activating and deactivating the buzzer.

–If the Drying indicator lamp is not flashing:

the buzzer is deactivated

–If the Drying indicator lamp is flashing:

the buzzer is activated

GSwitch the machine off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

To check:

^Make sure the dryer is switched off, the door is closed and the programme selector is at Finish and then carry out steps A to E.

The Drying indicator lamp will show you if the buzzer is activated.

^Switch off the dryer. The check is complete.

40

Image 40

Contents Operating instructions For condenser tumble dryer T 4262 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Consumption data Technical data Technical safety Correct usePage Operation Using accessories Safety with childrenDisposal of your old machine PC indicator light Control panelProgramme selector Programme sequence and check lampsCare symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Low temperatureStart the programme Changing the programme sequence Programme chart Automatic Timed dryingWarm air Cool airCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide General problemsProblem Possible cause Remedy There is a build Up of fluffLaundry is Not sufficientlyEven switches off Problem Possible cause Remedy Drying processGoes on too long or Check and fault indicator lamps Problem Possible cause Remedy Programme has Stopped,Has come on Sequence displayChanging the lamp After sales service Appliance guaranteeOptional accessories RepairsInstallation Front viewTransporting the machine to its installation site Installation siteReplacing the lid Before moving the machine again e.g. when moving house Levelling the machineRoom in which the dryer is located Washer dryer stackSetting up the drain hose External condensed water outletConnection to a sink drain outlet Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data SmoothingTechnical data Programmable functions for changing standard settings Programmable functions To checkProgrammable functions Buzzer is deactivated Activating and deactivating the buzzerBuzzer is activated Extending the cooling down time Cooling down time will be five miinutes longerCooling down time will be ten minutes longer Cooling down time is not extendedStandard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505