Miele T 4262 C Control panel, Programme selector, Programme sequence and check lamps, Door Button

Page 9

Control panel

a Programme selector

The programme selector can be turned clockwise or anti-clockwise.

b Programme sequence and check lamps

c Start button

Press the Start button to start a programme.

The Start indicator lamp will flash as soon as a programme can be started. It lights up constantly once the programme has started.

d I-On/0-Off button

To switch the machine on or off / to interrupt a programme.

The Anti-crease/Finish lamp will light up as confirmation that the machine has been switched on.

e Door Button

To open the door / to cancel a programme.

Pressing this button will open the door even when the machine is switched off at the mains.

If the machine is switched on at the mains and the door is opened the drum lighting will come on. It will go out a few minutes later to save energy.

PC indicator light

The indicator light marked PC is used by Miele Service technicians as an optical interface.

9

Image 9

Contents Operating instructions For condenser tumble dryer T 4262 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Consumption data Technical data Correct use Technical safetyPage Operation Safety with children Using accessoriesDisposal of your old machine Control panel PC indicator lightProgramme selector Programme sequence and check lampsTips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerLow temperature Select a programmeStart the programme Changing the programme sequence Programme chart Timed drying AutomaticWarm air Cool airEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit General problems Problem solving guideUp of fluff Problem Possible cause Remedy There is a buildLaundry is Not sufficientlyProblem Possible cause Remedy Drying process Even switches offGoes on too long or Check and fault indicator lamps Stopped, Problem Possible cause Remedy Programme hasHas come on Sequence displayChanging the lamp Appliance guarantee After sales serviceOptional accessories RepairsFront view InstallationInstallation site Transporting the machine to its installation siteReplacing the lid Levelling the machine Before moving the machine again e.g. when moving houseRoom in which the dryer is located Washer dryer stackExternal condensed water outlet Setting up the drain hoseConnection to a sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Smoothing Consumption dataTechnical data Programmable functions for changing standard settings To check Programmable functionsProgrammable functions Activating and deactivating the buzzer Buzzer is deactivatedBuzzer is activated Cooling down time will be five miinutes longer Extending the cooling down timeCooling down time will be ten minutes longer Cooling down time is not extendedStandard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505