Miele T 4262 C Problem Possible cause Remedy Programme has, Stopped, Has come on

Page 26

Problem solving guide

Problem	Possible cause	Remedy
The programme has	This is not a fault.	Use the "Timed drying -
stopped, the	The electronic unit has	Warm air" programme to
Anti-crease/Finish lamp	recognised that there is	dry individual items.
has come on in the	no laundry in the drum	Before changing a
sequence display and	and cancelled the	programme: Open and
the buzzer is sounding.	programme.	close the drum door.
	Drying individual
	garments or items which
	are already dry can also
	cause the programme to
	be stopped.

26

Image 26

Contents Operating instructions For condenser tumble dryer T 4262 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Consumption data Technical data Technical safety Correct usePage Operation Disposal of your old machine Safety with childrenUsing accessories Programme selector PC indicator lightControl panel Programme sequence and check lampsCare symbols Tips on dryingSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerStart the programme Low temperatureSelect a programme Changing the programme sequence Programme chart Warm air AutomaticTimed drying Cool airCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide General problemsLaundry is Problem Possible cause Remedy There is a buildUp of fluff Not sufficientlyGoes on too long or Problem Possible cause Remedy Drying processEven switches off Check and fault indicator lamps Has come on Problem Possible cause Remedy Programme hasStopped, Sequence displayChanging the lamp Optional accessories After sales serviceAppliance guarantee RepairsInstallation Front viewReplacing the lid Installation siteTransporting the machine to its installation site Room in which the dryer is located Before moving the machine again e.g. when moving houseLevelling the machine Washer dryer stackSetting up the drain hose External condensed water outletConnection to a sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data SmoothingTechnical data Programmable functions for changing standard settings Programmable functions To checkProgrammable functions Buzzer is activated Activating and deactivating the buzzerBuzzer is deactivated Cooling down time will be ten minutes longer Extending the cooling down timeCooling down time will be five miinutes longer Cooling down time is not extendedStandard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505