Miele T 4262 C operating instructions Programmable functions

Page 39

Programmable functions

Altering the residual moisture level in the Minimum iron programmes

The machine is designed to dry effectively using as little energy as possible.

However, if you require the laundry to be drier, it is possible to reduce the default residual moisture level in the Minimum iron programmes.

Please note that programme durations will be longer if this option is activated.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

–The programme selector is at Finish.

APress the Start button and keep it pressed in whilst carrying out steps

B-C.

BSwitch the dryer on with the I-On/0-Offbutton.

CWait until the Start indicator lamp comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Cottons Low temperature position.

FPressing the Start button switches between activating and deactivating the drier setting.

–If the Drying indicator lamp is flashing, the drier setting is activated

–If the Drying indicator lamp is not flashing, the drier setting is not activated and the residual moisture level is on the standard default setting.

GSwitch the machine off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

To check:

^Make sure the dryer is switched off, the door is closed and the programme selector is at Finish and then carry out steps A to E.

The Drying indicator lamp will show you if the drier setting has been selected.

^Switch off the dryer. The check is complete.

39

Image 39

Contents Operating instructions For condenser tumble dryer T 4262 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Consumption data Technical data Correct use Technical safetyPage Operation Safety with children Using accessoriesDisposal of your old machine Programme sequence and check lamps PC indicator lightControl panel Programme selectorTips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryLow temperature Select a programmeStart the programme Changing the programme sequence Programme chart Cool air AutomaticTimed drying Warm airEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit General problems Problem solving guideNot sufficiently Problem Possible cause Remedy There is a buildUp of fluff Laundry isProblem Possible cause Remedy Drying process Even switches offGoes on too long or Check and fault indicator lamps Sequence display Problem Possible cause Remedy Programme hasStopped, Has come onChanging the lamp Repairs After sales serviceAppliance guarantee Optional accessoriesFront view InstallationInstallation site Transporting the machine to its installation siteReplacing the lid Washer dryer stack Before moving the machine again e.g. when moving houseLevelling the machine Room in which the dryer is locatedExternal condensed water outlet Setting up the drain hoseConnection to a sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Smoothing Consumption dataTechnical data Programmable functions for changing standard settings To check Programmable functionsProgrammable functions Activating and deactivating the buzzer Buzzer is deactivatedBuzzer is activated Cooling down time is not extended Extending the cooling down timeCooling down time will be five miinutes longer Cooling down time will be ten minutes longerStandard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505