Troubleshooting
One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the following troubleshooting suggestions:
Problem: | Possible causes / Solution: | |
The tumble dryer won’t start. | ● | The plug is not plugged into the socket, or not making contact. |
| ● | There has been a power failure. |
| ● | The fuse has blown. Try to plug another appliance into the socket. |
| ● | You are using an extension cord? Try to plug the dryer’s power cord |
|
| directly into the socket. |
| ● | The door is not closed securely? |
| ● | The TIMER knob has not been set properly (see Start and Programmes). |
| ● | The START button has not been pressed (see Start and Programmes). |
Its taking a long time to dry. | ● | The filter has not been cleaned (see Maintenance). |
| ● | The temperature setting is not ideal for the type of fabric you are drying |
|
| (see Start and Programmes, and see Laundry). |
| ● | The water container needs emptying? The empty water light is on? (see |
|
| Maintenance). |
| ● | The condenser needs cleaning? (see Maintenance). |
| ● | The correct drying time has not been selected for the load (see Laundry). |
| ● | The air intake grille or rear vents are obstructed (see Installation, and see |
|
| Maintenance). |
| ● | The items were too wet (see Laundry). |
| ● | The dryer was overloaded (see Laundry). |
GB
Installation |
|
|
|
Description |
|
|
|
Programmes | Start and |
|
|
Laundry |
|
|
|
Suggestions | Warnings and |
|
|
Care | Maintenance |
| and |
|
|
Troubleshooting |
|
|
|
Service |
|
|
|
9