II
_REVERSINGTHE DOOR
,A WARNING:
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow the instructions below can result in damage to the dryer, property damage or personal injury.
O Open the door and remove the two plastic hole caps on the catch side by gently prying up with a flat blade screwdriver. Save these for step 6.
CAUTION: Be sure to support the weight of the door before removing the hinge screws.
O Remove the 4 screws securing the hinges to the door frame. Remove the two plastic cover caps on the side opposite the hinges. Reinstall the hinges and cover caps on the opposite sides from which they were removed.
rmm_rmm,_
HingeI Screw ::::::::::::::::::::::::::::::::::::::::
i., ,,_
O While supporting the door, remove the 4 screws, two from each hinge. Set the door aside face down on a protected surface to prevent damage to the door or the work surface.
O With the door on a protected surface, remove the 16 screws on each side of the door and lift off the inner
door frame using a flat blade screwdriver. Remove the latch hook and blank and move them to the opposite side.
• mm,_ | _mm,J |
O With the hinges and cover caps in the new locations, remount the inner door frame onto the outer door frame with the screws removed in step 3 above.
O Reinstall the door with the screws from step 2, and snap the hole caps into the open hinge mounting holes.
Swing Door
O Test the swing of the door to make sure the hinges
and latch are properly aligned and that the door clos- es and latches.
17
II