Kenmore 796.6927#, 796.7927# manual Cycle Modifier Buttons, Temp

II

CYCLE MODIFIER	BUTTONS
Each cycle has default settings that are selected		NOTE: To protect your garments,	not every dry level,
automatically. You may also customize some of these		temperature, or option is available	with every cycle. See
settings using the cycle modifier	buttons.	the Cycle Guide on page 21 for details.

AUTO DRY cycles are designed to properly care for specif- ic fabrics and loads. As a result, not all settings are avail- able for each cycle selection. Refer to page 22 for details.

TIMED DRY cycles have default settings, but you may also customize the settings using the cycle modifier buttons.

Press the button for the desired modifier until the indicator light for the desired value is lit.

Normal

..... LDrun'DrumLght _/ ControlLock _ c_

0TEMP

Adjusts the temperature setting from Air Only to Extra High. This allows precise care of your fabrics and garments. Press the TEMP CONTROL button repeatedly to scroll through available settings.

0DRY LEVEL

Selects the level of dryness for the cycle. Press the DRY LEVEL button repeatedly to scroll through available settings. Use this button to adjust the dry- ness of the articles in the load to your preferences.

•This option is not available with TIMED DRY cycles.

•The dryer will automatically adjust the cycle time. Selecting EXTRA DRY or MORE DRY will increase the cycle time, while LESS DRY or DAMP DRY will decrease the cycle time.

•Use a LESS DRY or DAMP DRY setting for items that you wish to iron or hang for final drying.

24

TIMED DRY

Allows you to manually select the drying time in

10-minute increments. Use this cycle for small loads or to remove wrinkles. Use the MORE TIME/LESS

TIME buttons to increase or decrease the selected

drying time in 1-minute increments.

II