American Dryer Corp EURO-24 manual Specifications

SECTION II

SPECIFICATIONS

A. SPECIFICATIONS

MAXIMUM CAPACITY (DRY WEIGHT)										50 lbs.			22.7 kg
BASKET (TUMBLER) DIAMETER									32-3/4"				83.2 cm
BASKET (TUMBLER) DEPTH									37-1/2"				95.3 cm
BASKET (TUMBLER) MOTOR										3/4 HP*			.560 kw
DOOR OPENING (DIAMETER)									21-1/2"				54.61 cm
BASKET (TUMBLER) VOLUME								18.3 cu. ft.					.518 cu.m.
DRYERS PER 20'/40' CONTAINER											10/20
DRYERS PER 45'/48' TRUCK											24/26
	VOLTAGE AVAILABLE						120-460v / 1ø - 3ø / 3, 4w / 50/60 Hz
	APPROX. WEIGHT (UNCRATED)								651 lbs.				295.3 kg
Gas	APPROX. WEIGHT (CRATED)								700 lbs.				317.7 kg
	HEAT INPUT							150,000 btuh				37,800 kcal/hr
	AIRFLOW								750 cfm				21cmm
	INLET PIPE CONNECTION							1/2" F.P.T.**					--
			OVEN SIZE
	KW		BTUH	KCAL/HR
			(60 HZ)	(50 Hz)
	20		68,280	17,200
Electric	24		81,960	20,650
	25		N/A	21,510
	30		102,450	25,810
						APPLIED VOLTAGE/PHASE/APPROX. AMP DRAW***
	KW			208/1ø			240/1ø				208/3ø			240/3ø	380/3ø		416/3ø			460/3ø
				60	50		60 Hz			50	60 Hz	50		50/60 Hz	60	50	60		50	60 Hz	50 Hz
				Hz	Hz					Hz		Hz			Hz	Hz	Hz		Hz
	20			103	--		90			87	--	--		--	--	33	--		--	--	--
	24			--	--		--			--	70	--		61	--	--	--		36	31	--
	25			--	--		--			--	--	--		--	--	40	--		--	--	--
	30			--	--		--			--	86	--		75	--	--	--		44	38	--
Steam****	VOLTAGE AVAILABLE											120-460v / 1ø - 3ø / 3, 4w / 50/60 Hz
	APPROX. WEIGHT (UNCRATED)										683 lbs.						309.9 kg
	APPROX. WEIGHT (CRATED)										733 lbs.						332.3 kg
	AIRFLOW										750 cfm						21 cmm
	COMPRESSED AIR VOLUME										.75 cfh						.02 cmh
	AIR CONNECTION										1/8" F.P.T.							--
	STEAM CONSUMPTION								BOILER HP NORMAL LOAD
		142 lbs/hr		64.26 kg/hr							4.1
	OPERATING			PRESSURE						SUPPLY CONNECTION**						RETURN CONNECTION
	125 psi max			8.6 bar					1"				--			1"				--
Shaded	areas are in metric equivalents

*50V reversing dryer available with 3ø motors standard (1/2 HP [.37 Kw] motors).

**Size of piping to dryer varies with installation conditions. Contact factory for assistance.

***Contact factory for information not listed, 3ø figures shown are for 3-wire service.

****Specify air-operated or electromechanical steam damper system. Air-operated steam damper system must be provided with clean, dry and regulated 80 psi (+/-10 psi) or 552 KPa (+/- 69 KPa) air supply.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

6