3.Loosen the top screw from each of the 2 hinges in Step 2.
A
B
A
B
3.Reinstall the door strike and cosmetic screw on the opposite side of dryer door opening from where they were removed. NOTE: Door strike and plugs must be on the same side
of the dryer door opening.
Reinstall the door
1.Remove the 4 screws and 2 hinges from the dryer door.
A. Loosen these screws.
B. Remove these screws.
4.Remove the dryer door and the hinges by lifting upward on the door. Lay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel.
5.Remove the 4 plastic plugs located outside the dryer door opening.
6.Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4.
Reverse the strike
1.Remove the door strike from the dryer door opening.
2.Remove the cosmetic screw opposite the door strike.
A 
B
2.Replace the 4 screws in the same holes.
3.Remove the 4 screws from the opposite side of the door.
4.Install the 2 hinges to the front panel of the dryer using 4 screws. Use the
5.Install screws in top hinge holes in the door. Do not tighten screws. Leave approximately 1/4" (5 mm) of screw exposed.
A. Door strike
B. Cosmetic screw
13