English
Installing Quick Sink Adapter:
When installing the quick sink faucet adapter to the faucet, follow the steps below:
1.First, remove the aerator from your faucet nozzle and determine the size/type of the faucet.
2.Once you determine the size/type of the faucet (Outside Threaded End or Inside Threaded End), place the proper sized rubber washer into the silver faucet adapter.
3.Attach the silver faucet connector to the faucet.
4.Attach the faucet connector to the water inlet hose and make sure that the rubber washer is placed in between.
5.Attach the other end of the water inlet hose to the washer water inlet and make sure that the rubber washer is placed in between.
Faucet
Washers
Faucet Adapter
Quick Connector
Drain hose
Washer 
Water inlet hose
Washer
Rear View of Washer
14