Schneider Electric EM4000 manual Regulatory Compliance, Equipment servicing and access

930-134-01-A.00	PowerLogicTM Series EM4000
11/2013	Installation Guide

Regulatory Compliance

The PowerLogic EM4000 meter must be installed by a qualified electrician with knowledge of local installation regulations. Initial installation of the unit, and any subsequent modification to the unit, must be inspected by the local electrical inspection authority.

The PowerLogic EM4000 meter complies with the standards listed in Table 3.

Table 3: Regulatory Compliance

Discipline	Regulatory and industry standard
Standards	UL certified to IEC/EA/UL/CSA 61010-1 2nd Edition
	CSA-C22.2 No. 61010-1-04
Emissions (EMC)	FCC Part 15 Class B, ICES-003 EN55022, IEC 6100-4-5
Surge power/telephone lines	ANSI/TIA968-A: 2002

Equipment servicing and access

The information in this section must be considered as a mandatory requirement, and must be strictly adhered to when installing and operating PowerLogic EM4033 and EM4080 meters.

Access to equipment

The equipment must be accessible to authorized personnel only. Equipment must be installed in areas where access can be restricted.

Servicing the equipment

No preventive maintenance is required on any of the equipment. Visually inspect the equipment yearly and ensure it is free of dust or other particles. If necessary, wipe with a clean cloth.

Component servicing

Individual components are not user-serviceable, and must be returned to Schneider Electric for repair. If an equipment fault occurs, do not attempt to repair the faulty component.

All maintenance activities should be performed by qualified personnel only. Do not perform any operating or maintenance procedures that are not described in the product documentation provided by Schneider Electric.

Graphical symbols

Table 4 shows the graphical symbols that appear on the equipment.

©2013 Schneider Electric All Rights Reserved 31