Oregon Scientific RA126 USE in the Water, Operation Backlight and Keypad Lock, To replace battery

EN

Appears when the battery is too low to operate the sensor. “- -” is shown instead of temperature and compass values.

To replace battery:

1.Using a coin, remove battery compartment lid by twisting counter-clockwise until it clicks out of place.

2.Remove the old batteries and insert the new matching the polarities.

3.Replace the lid by twisting it clockwise until firmly in place.

NOTE When battery is replaced it is important to re- calibrate the magnetic sensor.

USE IN THE WATER

The RA126 is water-resistant up to 50 meters (164 feet).

		SHOWERING		SHALLOW
		(WARM/	LIGHT	DIVING/	SNORKELING
	RAIN	COOL	SWIMMING	SURFING/	/ DEEP
	SPLASHES	WATER	/ SHALLOW	WATER	WATER
	ETC	ONLY)	WATER	SPORTS	DIVING
50M /
164	OK	OK	OK	OK	NO
FEET

NOTE Set the unit before exposing it to excessive water. Pressing the keys while in the water or during heavy rainstorms may cause water to enter the unit.

OPERATION

BACKLIGHT AND KEYPAD LOCK

Press to turn backlight ON for 5 seconds.

NOTE The backlight function will not operate while the low

battery icon is displayed and it will return to normal once batteries have been replaced.

To toggle keypad lock ON / OFF:

Press and hold / . indicates keypad is locked.

4