Uniden owner manual To operate UH-100 in Duplex Mode

Operation with the aid of a repeater

The Signal coming from your radio is received by the Repeater Station and then re- transmitted at the same time on another channel. This operation is called "Duplexing".

Your UH-100 is designed withthe capability to access and use repeater stations.

Channels 01 through 08 have the option to operate in Duplex Mode. When any of these channels are set to operate in duplex mode during transmission, the UH-100 automatically sends the signal at a frequency 30 channels above the original. After transmitting, the radio reverts back to its original operating frequency.

For example,

CH01 on DuplexMode willReceive on CH 01 but Transmit on CH31

CH02 on Duplex Mode willReceive on CH 02 but Transmit on CH32 etc....

If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, the repeater station down-converts your signal and retransmits on CH01.

To operate UH-100 in Duplex Mode,

ego CH01 is being used in your area for repeater use.

MEM

s

I.{ 70.1.{i'5MHz

.-4

,-, ,~@

LI I

eCKF

~

«(-;:'» lelIEU»)«(!2!» [(~) ..

Press DUPLEX momentarily. The DUP icon appears.

AlEAI

DUP

S

'I7Ei'li'5MHz

,-, ,~@

LI I

eCKF

11