Uniden UH-100 owner manual Choosing a Priority Channel, Drop-Out Delay

Choosing a Priority Channel

The starting channel, when Group Scanning is initiated, is always the Priority Channel. Changing the PRI channel setting while scanning,

ego PRI Channel is CH17 (476.825 MHz)

a. press"", to select a higher channel (scanning pauses)

- or -

GS

SBCN

"I 75.8SGMHzPR,

,,-,

,C,

b. press"', to select a lower channel

GS

SSCN

"I 75.8GGMHzPRI

,,-

,,--'

Drop-Out Delay

While scanning, the UH-100 stops at a busy channel and receives a transmission. When the received signal is over, the unit will wait for three seconds for the return of the signal, otherwise, the radio resumes scanning.

15