Uniden UH-100 owner manual +~Pn.c, Tone Period Programming

Tone Period Programming

Tone Period is the duration of one tone in a SElCALL ID sequence. The setting of this parameter depends on the application. On long distance communications, where the signal strength of the transmitted information is greatly reduced and affected by noise,

it is advisable to use a longer tone period. A long tone period gives the decoder more time and information to check and evaluate the code.

Important Note: Ensure all radios in your group use the same tone period setting, otherwise, you will not be able to selectively call one another.

To change the Tone Period setting.

From the main menu, using the... or T key, go to the Tone Period Programming Menu. (If you have never changed the Tone Period, the default setting is 40 mSec)

,-, '~

..DIID TSO ,- Cl IIi~

(C ol	~~~	+~Pn.c
T8Q

Press the MEM key to start programming. The Tone Period on display will flash. This indicates that you can now change the setting.

			TSO,-, I eCH
	'" Mo"			,- Cl		.;;
	... .-.'-,
	~~~~
To change, use the... or T key.
You can select either, 40,70, 100						7SQ':'-'
or 20 mSec.
When completed, pressthe MEM to store			" l~~'~"				,	LI 1
the new Tone Period setting	into the		I		~q~q,			~. . '7SQ ,-, ,
memory .	. .		7SQ,-,		-	,
	.'"0. £-'0'.,			,-				. - ."	,- C,
		-			, ,			~o7d"
		L ,				7SQ	,-,	..I
					~!M:		,-	-'I
								LI

35