Uniden UH-100 owner manual Mem, -, ~@

Page 14

Scanning

The UH-100 has a scanning feature that allows you to search for active channels automatically.

Furthermore, the UH-100 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning (GS), to give you flexibility and allow you to use the radio more effectively.

To initiate scanning.

1.Assuming the unit is on CH 17 when switched on.

s MEM, -, ~@

l{ 75.825MHz , , ~

OFF

~~

((saIAMBl£» ((~EM)) ((~») «0&135») ~

TSQ'T'"

2.Press SCN and Scanning starts.

MEM,=g,-,§J@

saN,- """

~'""",I- ,~

OFF

~

~

~Q

- 'T'"

-~~~

1.Open Scan (OS) Mode

Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning will stop on that channel.

Example. CH40 becomes active.

If the received signal ceases, the unit will wait for at least 3 seconds for the signal to return, otherwise scanning resumes.

MEM" ,-,

S ...11 SCN-

l{71l{aaM~" - ,

MEM" ,-,

SsaN-

l{71l{aaM~" ~- ,

 

~

To skip the active channel, press MEM momentarily.

MEM '=0,-,

Scanning resumes.

saN0- ,eD

 

,='-'

To deactivate SCAN, press the SCN switch or the PTT Button.

Note: If SCAN is deactivated while in an active channel, the UH-100 will stay on that active channel. If no other channels are active, the UH-100 will reinstate

the starting channel.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents
Sundowner UH-100 Scanning Table of Contents TransmitterSection Controls I Indicators I Connectors 11 ~ Connectors FrontPanel Introduction @@ ~~ ~ Included with your UH-100Setting the Squelch Operation~15Q Selecting a ChannelUsing Repeater Channels TransmittingTo operate UH-100 in Duplex Mode LI @ OfF MEM, -, ~@ 1711OOMHz Drop-Out Delay Choosing a Priority Channel~ ~ Programming Scan ChannelsEM. ,-,s ...II~ I Channel Seeking OperationVoice Scrambler LCD Backlight Level Control LCD backlight level can be changed to BRIGHT, DIM, or OFFSelective Calling This is UH-100 Calling Making a CallILl Acknowledgment Tone~~~ $ TI Transmitting ID from Memory~I~ Receiving a Call~~~r ~~~~~GD e ILlGroup Calling 23450 23451 23452 23453 23454Tone squelch Receiver Quieting Receiving Calls when in Quiet Mode Activating the Tone Squelch Receiver Quieting~ ~~ Selcall Advance Programming 150- I ~@Page TSQ,- -IIS Radio ID Programming+~Pn.c Tone Period ProgrammingLead -In Delay Programming TSO Rsa Alarm Mode Programming II i~ Group Call Mode Programming ~A~Caller ID Decoding Service Memory Backup Care and MaintenancePreventive Maintenance Simplex Operating Mode Uhfcb Channel InformationDuplex Operating Mode Assignment Frequency MHzSpecifications GeneralReceiver Section Measurement ConditionsTransmitter Section Selcall Warranty UnidE!n@