Uniden owner manual This is UH-100 Calling, Making a Call

This is UH-100 Calling.....

The UH-1 00 is shipped from the factory with a SELCALL ID setting of "00000". Refer to the Advance Section on page 32 for details on how to change/customize your UH-100 SelcalllD.

Making a Call

To make a call, press and release the TONE CALL switch on the microphone.

MEM	- ,-	f@1	II~+
5
nnnnn	t. ~	@
uuuuu		e OFF	lLdmJ
~ ~j) ~	((~)) ~
T60	~.

The last used SelcalllD will be displayed. (If you have never used the Selcall feature 00000 will appear.)

Press the MEM switch on the UH-100 and the last digit of the SelcalllD will flash. This indicates that you can now start to enter the Transmit SelcalllD code.

- -,-

nnnnnI uuuuu

nnnt?A' - f,--

uuuu.u

The flashing digit is the one you can program.

To select the digit you wish to change use the ~ / SCRAMBLE or ~ / DUPLEX to move the position.

	:rl	~	@ OR
I D°tWR	~	I
		~OFF

\4 OfJooa

- ,- f-

. ~

~<aD~.

21