Uniden UH-100 owner manual ILl, Acknowledgment Tone

To change the flashing digit use the Channel"" and" buttons.

IDD~P			OR	r:;ood;	- '-1~@
4	--~				L	\I e
~~~~.				((~)~~~.~
When completed, press and hold the TONE CALL button to send.						.
fEI	CA!. MEM	"-,
RF	1		~I.@
1i'3&fS		ILl	e
4			~
~	If~))~l~)	.

This ID will be stored in the Last ID Transmitted buffer. Every time the Tone call

button is pressed the last ID will be shown. To transmit the ID again, simply press and hold the Tone Call button once more.

When the called radio is successfully reached an Acknowledgment Tone will be received.

Acknowledgment Tone

The UH-100 automatically acknowledges all the Selective Calls it receives, thereby advising the caller that it has been contacted successfully.

Three Iow tone beeps characterise the UH-100 Acknowledgment Tone.

22