2.Keep the #2 Phillips screwdriver ready.
3.Follow the procedure listed in Before working inside your system.
4.Remove the PCIe mezzanine card. See Removing a PCIe mezzanine card.
Steps
1.Remove the two screws that secure the Network Daughter Card (NDC) to the system board.
2.Lift the card from the system board.
Figure 18. Removing and installing the NDC |
|
| |
1. | slot on the NDC | 2. | screw (2) |
3. | NDC | 4. | standoff (2) |
5. | connector on the system board | 6. | tab projections |
Next steps
1.Install the NDC. See Installing the Network Daughter Card.
2.Install the PCIe mezzanine card. See Installing a PCIe mezzanine card.
3.Follow the procedure listed in After working inside your system.
62