Dell E02B owner manual Using USB diskette or USB DVD/CD drives, Hard-drive/SSD indicator patterns

Item	Indicator, Button, or Icon	Description
	Connector
		1.8 inch SSD	Eight 1.8 inch hot-
		system	swap SATA SSDs.
2	USB management port	Allows a USB device to be connected to
		the system.
3	USB management	The USB management port can function
	port/iDRAC Direct port	as a regular USB port or provide access to
		the iDRAC features. For more information,
		see the iDRAC User’s Guide at dell.com/
		esmmanuals.
4	iDRAC Direct LED	The management indicator lights when
	indicator	the iDRAC controls the USB1 port for
		management functions.
5	Sled handle	Used to slide the sled out of the
		enclosure.
6	Status indicator	Provides information about the status of
		the system.
7	Sled power-on	The power-on indicator lights when the
	indicator, power	sled power is on. The power button
	button	controls the power supply output to the
		system.

Using USB diskette or USB DVD/CD drives

The sled has USB ports on the front which allow you to connect a USB diskette drive, USB flash drive, USB DVD/CD drive, keyboard, or mouse. The USB drives can be used to configure the sled.

To designate the USB diskette drive as the boot drive:

1.connect the USB drive

2.restart the system

3.enter the System Setup

4.set the drive as first in the boot sequence

The USB device is displayed in the boot order setup screen only if it is attached to the system before you run the System Setup. You can also select the boot device by pressing <F11> during system start-up and selecting a boot device for the current boot sequence.

Hard-drive/SSD indicator patterns

The hard-drive/SSD (Solid State Drives) indicators display different patterns as drive events occur in the system.

NOTE: The sled must have a hard-drive/SSD or a hard-drive blank installed in each drive bay.

8