StreamLight VF-PS1 instruction manual Setting/monitor modes, Top View Mode, Parameter Setup Mode

Page 26

E6581429

3.2 Setting/monitor modes

This inverter has following three setting/monitor modes.

(1) Top View Mode

When the inverter is powered on, it enters this mode first. The top window displays the operating status.

In this mode, you can set a panel operation frequency, use a function key as the EASY key, and so on. ⇒ Refer to “3.3. Operation in Top View Mode”.

(2) Parameter Setup Mode

This mode allows you to set parameters.

⇒ Refer to “4. Searching and setting parameters”.

(3) Status Monitor Mode

		This mode allows you to monitor various kinds of statuses and information, such as the operating status of the
	3	inverter and information on the terminal board.
	3	⇒ Refer to “5. Monitoring the operation status”.
		⇒ Refer to “5. Monitoring the operation status”.

The figures below show the top windows of these modes.

To change from one mode to another, press the [ESC] key.

Top View Mode

FWD 60.0 Hz

STOP

ESC

0.0 Hz

ESC

Quick

Lng

---

Top View Mode

Status Monitor Mode

Real-time information

	Rotative direction				FWD
	Frequency reference				60.0Hz
	Output current			0%
	Input voltage			99%
	Output voltage			0%

	Top				Prm

Parameter Setup Mode

Category Selection

History function

Basic Parameters

Extended Parameters

Changed Parameters

TopMon

Status Monitor Mode

Parameter Setup Mode

*) When Quick mode is selected with

ESCthe EASY key, other windows are displayed.

C-2

Image 26

Contents Tosverttm VF-PS1 Page Safety precautions Transportation & installationII. Introduction Contents Page Check the product Contents of the product codeRead first This manual E6581386Structure of the main body Names and functions Outside viewLCD panel STOP/RESET key The drive stops operationOperation panel To 5 F1 to F4 function keysAbout changing parameter settings FWDMain circuit terminal VFPS1-4037PDE, 4055PDE VFPS1-4150PLE PO PA/+ PE PO PA/+ PB PC/- PE PA/+ Detaching the cover Front coverVFPS1-4007PLE~4220PLE Grounding capacitor switching methodCharge lamp Case of adopting external braking resistor Optional VFPS1-4300PLE~4900PLEInstallation Installation environment How to installConnection of equipment Standard connection diagram sink logic Standard connectionsStandard connection diagram source logic Main circuit terminals Power supply and motor connectionsDescription of terminals Connection with peripheral equipmentLanguage Selection window appears Settings to be made at first power onOperations Parameter Setup Mode Setting/monitor modesTop View Mode Status Monitor ModePress the control dial Operation in Top View ModeSetting a panel operation frequency Explanation of the top windowUsing an Easy key function Select/confirm the desired language with the control dial Selecting a language to be displayedPress the F2 Lng key Performing jog runThen press the STOP/RESET key again Emergency stop / reset operationPress the STOP/RESET key Press the F4 key to carry out jog runWhen Quick mode is selected Searching and setting parametersSelect/confirm History function using the control dial This window, settings can be changedEx. Select/confirm Command input mode and Base frequency Setting a basic parameterSelect/confirm Basic parameters using the control dial F1 F2 F3Change the parameter setting Setting an extended parameterSelect/confirm Extended parameters using the control dial Select/confirm Changed Parameters using the control dial CMOdMonitoring the operation status Items displayed Description Display of detailsSelect/confirm the desired item using the control dial Displaying details of an item monitoredList of function key functions Function key Display Reference PositionPage Measures to satisfy the EMC directive How to cope with the CE standardsMeasures to satisfy the standards Ex. Countermeasure inverter wiring PLE typePDE type RES, PWR, noWiring port plate PLE type PDE type Measurements to be taken to satisfy the UL/CSA standards Conforming to UL TypeSelection of wiring materials and devices Selection of peripheral devicesSelection of wiring equipment Rated current a AC-1Table of parameters PWMPage Specifications Models and their standard specificationsOverleaf LCD Outline drawing Outside dimensions and massOutside dimensions and weight Fig. C Fig. G