StreamLight VF-PS1 instruction manual Displaying details of an item monitored

Page 36

E6581429

5.1Displaying details of an item monitored

1.Select/confirm the desired item using the control dial.

(Ex. Select/confirm “Output current”)

The monitor window of the item selected appears.

*Depending on the item selected, no monitor window may be displayed.

Functions of function keys

F1 : Goes to the Top View Mode.

F4 : Goes to the Parameter Setup Mode.

QHow to use monitor windows

Monitor windows can be broadly classified under the following three types

<Type of window 1: Displays a value and a graph>

This type of window displays an analog value, such as an output frequency, output current or output voltage.

(Ex. “Output current”)

5 It displays the current value in both of numerical form and graph form.

In addition, the minimum allowable value (min) and the maximum allowable value (max) are also displayed at the bottom of the window.

<Type of window 2: Displays information in a graph form>

This type of window displays input/output terminal information and parts replacement alarm.

(Ex. “Input terminal : S4, S3...R, F”)

It displays the ON/OFF status of each terminal signal or alarm signal in a graph form.

If the arrow is moved to a terminal or alarm symbol, the name of the function assigned to the terminal or the name of the alarm is displayed.

<Type of window 3: Displays information in a list form>

This type of window displays detailed past trip information. (Ex. Past trip # 1 (latest))

It displays the conditions under which the inverter was operated at the occurrence of tripping.

Status Monitor Mode

Output current

22%

min=0	max=185
Top	Prm

Status Monitor Mode

Output current

22%

min=0	max=185
Top	Prm

Status Monitor Mode

Input terminal 1 : S4,S3…R,F

S4 S3 S2 S1 RES ST R F

ON

OFF

Forward run

TopPrm

Past trip # 1 (latest)

	E	:Emergency stop
	Sequence number		1
	Output frequency		25.0Hz
	Rotative direction		FWD
	Frequency reference		30.0Hz
	Output current		40%

Top

Prm

E-2

Image 36

Contents Tosverttm VF-PS1 Page Safety precautions Transportation & installationII. Introduction Contents Page Contents of the product code Read firstCheck the product This manual E6581386Structure of the main body Names and functions Outside viewSTOP/RESET key The drive stops operation Operation panelLCD panel To 5 F1 to F4 function keysAbout changing parameter settings FWDMain circuit terminal VFPS1-4037PDE, 4055PDE VFPS1-4150PLE PO PA/+ PE PO PA/+ PB PC/- PE PA/+ Detaching the cover Front coverGrounding capacitor switching method Charge lampVFPS1-4007PLE~4220PLE Case of adopting external braking resistor Optional VFPS1-4300PLE~4900PLEInstallation Installation environment How to installConnection of equipment Standard connection diagram sink logic Standard connectionsStandard connection diagram source logic Power supply and motor connections Description of terminalsMain circuit terminals Connection with peripheral equipmentSettings to be made at first power on OperationsLanguage Selection window appears Setting/monitor modes Top View ModeParameter Setup Mode Status Monitor ModeOperation in Top View Mode Setting a panel operation frequencyPress the control dial Explanation of the top windowUsing an Easy key function Selecting a language to be displayed Press the F2 Lng keySelect/confirm the desired language with the control dial Performing jog runEmergency stop / reset operation Press the STOP/RESET keyThen press the STOP/RESET key again Press the F4 key to carry out jog runSearching and setting parameters Select/confirm History function using the control dialWhen Quick mode is selected This window, settings can be changedSetting a basic parameter Select/confirm Basic parameters using the control dialEx. Select/confirm Command input mode and Base frequency F1 F2 F3Setting an extended parameter Select/confirm Extended parameters using the control dialChange the parameter setting Select/confirm Changed Parameters using the control dial CMOdMonitoring the operation status Items displayed Description Display of detailsSelect/confirm the desired item using the control dial Displaying details of an item monitoredList of function key functions Function key Display Reference PositionPage How to cope with the CE standards Measures to satisfy the standardsMeasures to satisfy the EMC directive Ex. Countermeasure inverter wiring PLE typePDE type RES, PWR, noWiring port plate PLE type PDE type Measurements to be taken to satisfy the UL/CSA standards Conforming to UL TypeSelection of wiring materials and devices Selection of peripheral devicesSelection of wiring equipment Rated current a AC-1Table of parameters PWMPage Specifications Models and their standard specificationsOverleaf LCD Outside dimensions and mass Outside dimensions and weightOutline drawing Fig. C Fig. G