StreamLight VF-PS1 instruction manual Setting an extended parameter, Change the parameter setting

E6581429

3. Using the control dial, select/confirm an item or specify/confirm a value.

(In this example, “Panel / LCD-option” is selected and confirmed or frequency of 90.0Hz is specified and

confirmed.)
When the change you made is saved, the title of the	•		If the setting selected is
parameter stops blinking and the screen returns to the			changed by selecting a
previous window.			menu
			Basic Parameters
				CMOd
			Command input mode
	0		:Terminal
		1	:Panel / LCD-option		∨
					口
	2		:RS485-2wire
		3 :RS485-3wire

• If the setting selected is changed by specifying a value

Basic Parameters

vL

Base frequency 1

90.0 Hz

min=25.0max=500.0

×1000 ×100 ×10 ×1

4.3Setting an extended parameter

1.Select/confirm “Extended parameters” using the control dial.

4

The Extended Parameters window appears.

Functions of function keys

F1 : Displays parameters in the number range of 900.

The number displayed decrements each time this key is pressed.

F2 : Displays the previous window.

F3 : Displays the next window.

Parameter Setup Mode

Extended Parameters

F100 :Low-speed signal freq

F101 :Speed reach frequency

F102 :Speed reach freq band

F105 :Priority of FWD/REV

F106 :Input terminal priority

F9-- F2--

F4	: Displays parameters in the number range of 900.	F1	F2	F3	F4
	The number displayed increments each time this key

is pressed.

2. Change the parameter setting.

To do this, perform steps 2 and 3 in the “3.2 Setting a basic parameter” section.

D-3