StreamLight VF-PS1 Press the F4 key to carry out jog run, Emergency stop / reset operation

Page 30

E6581429

1. Press the [F4] key to carry out jog run.

The jog run frequency is displayed on the screen.

(In this example, the operation frequency is set at 5.0Hz.) Operation continues as long as the [F4] key is pressed, and it stops when the [F4] key is released.

Functions of function keys

F1 : Switches between Quick mode and Standard Setting mode.

F2 : Goes to the Language selection window.

F4 : Executes a jog run command.

Top View Mode

FWD	60.0 Hz	JOG
		5.0 Hz
Quick	Lng	JOG
F1	F2	F4

	3.3.5 Emergency stop / reset operation
	To make an emergency stop or to reset the inverter, follow these steps. An emergency stop can be made when
3	operation is performed with the terminal board inputs (parameter CMOd=0, 2, 3 or 4).
3	1. Press the [STOP/RESET] key.

Blinking code “ EOFF ” is displayed in the upper right corner of the window.

2. Then press the [STOP/RESET] key again.

The Emergency Stop window appears and the blinking code “E” is displayed.

3. Then press the [STOP/RESET] key again.

The Trip window appears and the blinking code “CLr” is displayed.

	Top View Mode	EOFF

FWD	60.0 Hz	RUN
	60.0 Hz
	Emergency stop?

Quick	Lng	---

	Top View Mode
FWD	60.0 Hz	Trip
	E
	Emergency stop

Quick	Lng	---

	Top View Mode
FWD	60.0 Hz	Trip
	CLr
	Trip reset? (STOP-Key)

Quick	Lng	---

4. Last of all, press the [STOP/RESET] key once again to reset the inverter.

C-6

Image 30

Contents Tosverttm VF-PS1 Page Safety precautions Transportation & installationII. Introduction Contents Page Check the product Contents of the product codeRead first This manual E6581386Structure of the main body Names and functions Outside viewLCD panel STOP/RESET key The drive stops operationOperation panel To 5 F1 to F4 function keysAbout changing parameter settings FWDMain circuit terminal VFPS1-4037PDE, 4055PDE VFPS1-4150PLE PO PA/+ PE PO PA/+ PB PC/- PE PA/+ Detaching the cover Front coverGrounding capacitor switching method Charge lampVFPS1-4007PLE~4220PLE Case of adopting external braking resistor Optional VFPS1-4300PLE~4900PLEInstallation Installation environment How to installConnection of equipment Standard connection diagram sink logic Standard connectionsStandard connection diagram source logic Main circuit terminals Power supply and motor connectionsDescription of terminals Connection with peripheral equipmentSettings to be made at first power on OperationsLanguage Selection window appears Parameter Setup Mode Setting/monitor modesTop View Mode Status Monitor Mode Press the control dial Operation in Top View Mode Setting a panel operation frequency Explanation of the top windowUsing an Easy key function Select/confirm the desired language with the control dial Selecting a language to be displayedPress the F2 Lng key Performing jog runThen press the STOP/RESET key again Emergency stop / reset operationPress the STOP/RESET key Press the F4 key to carry out jog runWhen Quick mode is selected Searching and setting parametersSelect/confirm History function using the control dial This window, settings can be changedEx. Select/confirm Command input mode and Base frequency Setting a basic parameterSelect/confirm Basic parameters using the control dial F1 F2 F3Setting an extended parameter Select/confirm Extended parameters using the control dialChange the parameter setting Select/confirm Changed Parameters using the control dial CMOdMonitoring the operation status Items displayed Description Display of detailsSelect/confirm the desired item using the control dial Displaying details of an item monitoredList of function key functions Function key Display Reference PositionPage How to cope with the CE standards Measures to satisfy the standardsMeasures to satisfy the EMC directive Ex. Countermeasure inverter wiring PLE typePDE type RES, PWR, noWiring port plate PLE type PDE type Measurements to be taken to satisfy the UL/CSA standards Conforming to UL TypeSelection of wiring materials and devices Selection of peripheral devicesSelection of wiring equipment Rated current a AC-1Table of parameters PWMPage Specifications Models and their standard specificationsOverleaf LCD Outside dimensions and mass Outside dimensions and weightOutline drawing Fig. C Fig. G