Samson TM 500 owner manual Introduction / TM500 Features

Page 3

Introduction / TM500 Features

We know you don’t like reading owners manuals, but you’ve just purchased one of the finest powered mixers around, and we want to tell you about it! So, before you plug in and start making music, we’d like to suggest you take just a few moments out to scan these pages. We’ll make it as painless as possible, we promise—and, who knows, you might just pick up a tip or two.

The Samson TM500 is a practical, full-featured 12-channel stereo powered mixer— complete with built-in signal processing—all in a compact tabletop design. It’s ideal for use in rehearsal studios, small club venues, lounges and other sound reinforcement applications—in fact, it can be used wherever there are a number of microphone or line-level sources that need to be mixed down to a stereo output. Simply hook it up to a set of PA speakers and you’re ready to go!

In these pages, you’ll find an overview of TM500 features, followed by a guided tour of its front and rear panels. Then we’ll describe how the TM500 should be connected to your existing equipment (including a wiring diagram) and talk about the important topics of gain structure and grounding techniques. Next, we’ll cover a number of specific TM500 features (such as panning, equalization, auxiliary sends and returns, inserts and using the onboard effects) in detail. Finally, we’ll wrap things up with a reference Appendix and full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill it out and mail it so that you can receive online technical support and so we can send you updated information about other Samson products in the future. Also, be sure to check out our website (http://www.samsontech.com) for complete information about our full product line.

SPECIAL NOTE: Should your TM500 ever require servicing, a Return Authorization number (RA) is necessary. Without this number, the unit will not be accepted. Please call Samson at 1-800-372-6766 for a Return Authorization number prior to shipping your unit. Please retain the original packing materials and, if possible, return the TM500 in its original carton and packing materials.

TM500 Features

The compact design of the TM500 belies its extraordinary versatility and excellent sound quality. Here are some of its main features:

Twelve independent channels, including eight monophonic channels (with both mic and line inputs) and two stereo channels (with line inputs). This allows you to blend together a variety of source signals, including dynamic or condenser microphones, keyboards, CD/tape players, etc. Standard XLR mic connectors (for microphone inputs) and electronically balanced 1/4" jacks (for line-level inputs) are provided for each monophonic channel; dual line-level 1/4" jacks are provided for stereo channels. In addition, there is a dedicated stereo Tape input that provides dual phono (RCA) jacks.

Flexible switching allows the TM500 to be used either in standard stereo configuration or in a unique “split mono” mode, where it can drive both main PA speakers and onstage monitors simultaneously.

Built-in stereo power amplifier delivers 250 watts per side into 4 ohms. Any standard speaker cabinets (four, eight, or sixteen ohms) can be connected to the four rear-panel 1/4" speaker output jacks.

Power amp utilizes a variable-speed fan and bipolar design for maximum reliability and long life.

ENGLISH

3

Image 3
Contents TM500 Table of Contents TM500 Features Introduction / TM500 FeaturesTM500 Features 11/12 Guided Tour OverviewGuided Tour Channels Stereo Channel Samson Guided Tour Main SectionGuided Tour Main Section Guided Tour Main Section Samson Guided Tour Rear PanelSignal Ground T to MIC + Signal Connecting the TM500Samson TM500 Interconnections Stereo ConfigurationSamson TM500 Interconnections Split Mono ConfigurationSetting Up and Using The TM500 Setting the Correct Gain Structure Setting the Correct Gain Structure Grounding Techniques Using Equalization Seven-band graphic master equalizer Using Pan and Balance Using Aux Sends and Returns Using Inserts Parameter Using the Internal Digital Signal Processor DSPCaractéristiques Techniques du TM500 Introduction/caractéristiques du TMCaractéristiques Techniques du TM500 Visite Guidée Les voies Voies Stereo Visite guidée Section principale Visite guidée Section principale Visite guidée Section principale Visite guidée Face arrière Installation et utilisation du TM500 Réglages de gain Réglages de gain Deutsche Einleitung / TM500 MerkmaleTM500 Merkmale Übersicht die Kanäle Feld Links-Rechts zuzuteilen REV to AUX1 Bank Übersicht HauptabschnittÜbersicht Hauptabschnitt Übersicht Hauptabschnitt Übersicht Rückseite Einstellung und Bedienung des TM500 Einstellung der Gain-Struktur Einstellung der Gain-Struktur Características de la TM500 Introducción / Características de la TM500Características de la TM500 Recorrido guiado Canales Canal Stereo Españ Recorrido guiado Sección principalRecorrido guiado Sección principal Recorrido guiado Sección principal Recorrido guiado Panel trasero Ajuste y uso de la TM500 Ajuste de la estructura de ganancia correcta Ajuste de la estructura de ganancia correcta Effect Appendix a Table of TM500 Effects Banks 1Appendix a Table of TM500 Effects Banks 9 Specifications

TM 500 specifications

The Samson TM 500 is a powerful handheld microphone that has gained considerable recognition for its superior audio performance and ergonomic design. It is highly favored by audio professionals, musicians, and content creators alike, providing users with a reliable and versatile tool for capturing high-quality sound in various applications.

One of the standout features of the Samson TM 500 is its exceptional audio fidelity. It employs a dynamic cardioid pickup pattern, which effectively isolates the sound source while minimizing background noise. This makes it ideal for live performances, studio recordings, and broadcasting situations. The TM 500’s frequency response is finely tuned to deliver clear and crisp vocal reproduction, ensuring that every nuance of the performer’s voice is captured with accuracy.

The microphone is designed with durability in mind. Its robust construction features a metal body that can withstand the rigors of daily use, making it a suitable option for both stage and studio environments. The built-in shock mount further enhances its resilience by reducing handling noise, allowing for clean recordings even when the microphone is in motion.

Connectivity is another area where the Samson TM 500 excels. It includes a standard XLR output, enabling easy integration with various audio interfaces, mixers, and PA systems. This versatility allows users to utilize the mic in different setups without hassle. Additionally, it is compatible with wireless systems, adding to its flexibility in diverse audio applications.

In terms of usability, the TM 500 is designed to be user-friendly. It offers a lightweight and balanced feel, making it comfortable to hold during extended performances or recording sessions. The ergonomics of the microphone ensure that it can be handled easily while maintaining optimal sound quality.

The Samson TM 500 also stands out due to its affordability, making high-quality audio accessible to a wider audience. Whether you are a musician seeking professional sound on stage or a podcaster delivering content from your home studio, this microphone provides an excellent solution without breaking the bank.

In summary, the Samson TM 500 combines impressive audio performance, robust build quality, and ease of use, making it an excellent choice for anyone serious about sound. Its dynamic cardioid pickup pattern, durability, compatibility, and affordability position it as a standout option in the ever-expanding market of handheld microphones.