Samson TM 500 owner manual TM500 Features

Page 4

TM500 Features

ENGLISH

•Onboard digital signal processor (DSP) with 256 high-quality effects, including reverbs, delays, flanging and chorus.

•Phantom power switch enables you to use the TM500 with high-quality condenser microphones. When turned on, 48 volts of phantom power is provided to the mic connectors of all channels.

•Two Aux sends per channel (one pre-fader and the other post-fader) allow you to route multiple signals to the internal DSP or to external signal processors.

•Dual stereo aux returns— with dedicated front-panel level controls— give you the ability to blend in the return signal from the internal DSP and/or external signal processors or other line-level devices without having to utilize input channels.

•Extensive equalization includes independent 3-band eq for each monophonic channel and 2-band eq for each stereo channel, with 15 dB of cut or boost for low (100 Hz) and high (10 kHz) frequencies, and, in monophonic channels, 12 dB of cut or boost for the mid (1.8 kHz) frequency. In addition, a seven-band graphic master equalizer allows you to “tune” the output of the TM500 to the particular room environment you are in— particularly useful for eliminating ringing or feedback problems. This graphic equalizer can be used in stereo or can be “split” so that one side affects the main PA and the other side affects stage monitors.

•Constant level Pan controls for each mono channel that allow you to precisely place each input signal in the left-right plane. In stereo channels, a Balance control enables you to set the relative levels of the paired signals.

•Center detents for all Pan and EQ controls, making it easy to use the TM500 even in low-light live performance situations.

•Continuously adjustable wide-range input Trim controls for each channel allow you to precisely set the correct input and output gain structure.

•Independent 65 mm faders for each channel and for the stereo bus.

•Pre Fader Listen (PFL) soloing for each channel, allowing headphone monitoring of individual channels, pre-fader (but post-EQ) without affecting the signal being output either by the speaker or various line-level outputs.

•Front panel metering system includes a ten-segment level meter and allows you to view at a glance the continuous levels of the main stereo output and/or Aux sends.

•Peak LEDs for each channel show you at a glance when an input signal is on the verge of overloading.

•Dedicated status LEDs show main power and phantom power on/off.

•Separate Record out jacks (with dedicated level control) allow you to directly connect the TM500 to any tape recorder. In addition, a handy Mono output jack provides a line-level signal for connection to external monitor power amplifiers.

•An independent front-panel headphone output with dedicated volume control for private monitoring of the main stereo output, Aux sends, or soloed channels.

•Channel inserts for all eight monophonic channels, enabling you to use outboard signal processors such as equalizers, compressor/ limiters, or noise gates in a standard “effect loop.”

•Last but certainly not least, affordability. The TM500 has been designed from the ground up to provide versatility and excellent sound quality at a cost-conscious price.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents TM500 Table of Contents Introduction / TM500 Features TM500 FeaturesTM500 Features Guided Tour Overview 11/12Guided Tour Channels Stereo Channel Guided Tour Main Section SamsonGuided Tour Main Section Guided Tour Main Section Guided Tour Rear Panel SamsonConnecting the TM500 Signal Ground T to MIC + SignalTM500 Interconnections Stereo Configuration SamsonTM500 Interconnections Split Mono Configuration SamsonSetting Up and Using The TM500 Setting the Correct Gain Structure Setting the Correct Gain Structure Grounding Techniques Using Equalization Seven-band graphic master equalizer Using Pan and Balance Using Aux Sends and Returns Using Inserts Using the Internal Digital Signal Processor DSP ParameterIntroduction/caractéristiques du TM Caractéristiques Techniques du TM500Caractéristiques Techniques du TM500 Visite Guidée Les voies Voies Stereo Visite guidée Section principale Visite guidée Section principale Visite guidée Section principale Visite guidée Face arrière Installation et utilisation du TM500 Réglages de gain Réglages de gain Einleitung / TM500 Merkmale DeutscheTM500 Merkmale Übersicht die Kanäle Feld Links-Rechts zuzuteilen Übersicht Hauptabschnitt REV to AUX1 BankÜbersicht Hauptabschnitt Übersicht Hauptabschnitt Übersicht Rückseite Einstellung und Bedienung des TM500 Einstellung der Gain-Struktur Einstellung der Gain-Struktur Introducción / Características de la TM500 Características de la TM500Características de la TM500 Recorrido guiado Canales Canal Stereo Recorrido guiado Sección principal EspañRecorrido guiado Sección principal Recorrido guiado Sección principal Recorrido guiado Panel trasero Ajuste y uso de la TM500 Ajuste de la estructura de ganancia correcta Ajuste de la estructura de ganancia correcta Appendix a Table of TM500 Effects Banks 1 EffectAppendix a Table of TM500 Effects Banks 9 Specifications

TM 500 specifications

The Samson TM 500 is a powerful handheld microphone that has gained considerable recognition for its superior audio performance and ergonomic design. It is highly favored by audio professionals, musicians, and content creators alike, providing users with a reliable and versatile tool for capturing high-quality sound in various applications.

One of the standout features of the Samson TM 500 is its exceptional audio fidelity. It employs a dynamic cardioid pickup pattern, which effectively isolates the sound source while minimizing background noise. This makes it ideal for live performances, studio recordings, and broadcasting situations. The TM 500’s frequency response is finely tuned to deliver clear and crisp vocal reproduction, ensuring that every nuance of the performer’s voice is captured with accuracy.

The microphone is designed with durability in mind. Its robust construction features a metal body that can withstand the rigors of daily use, making it a suitable option for both stage and studio environments. The built-in shock mount further enhances its resilience by reducing handling noise, allowing for clean recordings even when the microphone is in motion.

Connectivity is another area where the Samson TM 500 excels. It includes a standard XLR output, enabling easy integration with various audio interfaces, mixers, and PA systems. This versatility allows users to utilize the mic in different setups without hassle. Additionally, it is compatible with wireless systems, adding to its flexibility in diverse audio applications.

In terms of usability, the TM 500 is designed to be user-friendly. It offers a lightweight and balanced feel, making it comfortable to hold during extended performances or recording sessions. The ergonomics of the microphone ensure that it can be handled easily while maintaining optimal sound quality.

The Samson TM 500 also stands out due to its affordability, making high-quality audio accessible to a wider audience. Whether you are a musician seeking professional sound on stage or a podcaster delivering content from your home studio, this microphone provides an excellent solution without breaking the bank.

In summary, the Samson TM 500 combines impressive audio performance, robust build quality, and ease of use, making it an excellent choice for anyone serious about sound. Its dynamic cardioid pickup pattern, durability, compatibility, and affordability position it as a standout option in the ever-expanding market of handheld microphones.
Top Page Image Contents