Tascam DM-3200 owner manual Connections Other connections

Page 43

3 – Connections : Other connections

WARNING

More than one such word sync source can cause serious problems, including possible damage to monitoring equipment.

The DM-3200 can act as a word sync master or slave (set up in software—see “Clock setting” on page 44). The switch allows the OUT to act as a THRU when the DM-3200 is receiving word sync signals, as well as enabling and disabling 75Ω termination on the input.

TO METER Use the cable provided with the optional meter bridge (MU-1000) to connect the meter bridge to this connector of the DM-3200.

FOOT SW Connect a standard momentary foot (or other) switch to this 1/4" jack. It can either be push- to-make or push-to-break, as the polarity can be changed in software.

For details of how to do this, as well as how to set up the footswitch, see “SWITCH utility” on page 37.

USB This is used to connect the DM-3200 to a host computer for bi-directional control. This is, the com- puter can control the DM-3200—see the documenta- tion supplied with the TASCAM utility software— and the DM-3200 can be set up as a DAW controller, controlling the DAW software running on the host computer.

We strongly suggest that you use only the USB cable supplied with the DM-3200 to make the USB con- nection, and that this connection and disconnection are made with the DAW software, or any other soft- ware communicating with the DM-3200, not running.

Note that no drivers are necessary when using the DM-3200 with OS X or Windows XP.

Power input As always, check to make sure that the voltage requirements marked on the unit match your power supply. Use a properly grounded power supply, and connect the DM-3200 to it using a power cord which provides grounding facilities (such as the one provided with the DM-3200).

TASCAM DM-3200 User’s Manual 43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Digital Mixing Console HAZARD, do not Expose this Appliance to Rain or Moisture Important Safety Instructions Contents Routing & assignment ConnectionsChannel modules Remote operation SpecificationsEffects Midi17 Channel delay Gate/Expander preset library entriesList of Figures Supported transport machine control Effects Remote operationPlease read this manual IntroductionComputer DAW integration Other key pointsMixer channels Introduction About the DM-3200About the DM-3200 Channel destinationsUnpacking the DM-3200 Introduction Unpacking the DM-3200About the manual Introduction About the manualWhat’s in the manual Special notes for touch-sensitive faders Introduction Special notes for touch-sensitive fadersCopyright, etc Features of the DM-3200 Introduction The features of the DM-3200Machine control section Module & layer control sectionModifier section Library section and CF card slotSmart keys Basic operational conceptsWhat’s on the screen? Explanation of the top line of screen displays Jumping to commonly-used screensPODs Basic operational concepts Special controlsSpecial controls Fader layersPOD knobs used in a multi-control Screen Encoder mappings GATE/DYN dynamics processor modeBasic operational concepts Encoders EncodersHard left Little less hard Centered Little to Left Right Reading the encoder indicatorsThan middle Three indicators Now off Now lit One half-litNo cut or boost Slight boost note Little more boost Lowest frequency Middle Little higherLow shelf High shelf Peak Notch Encoder behaviorFull cut Below nominal Nominal 0dB Above nominal CF cards Basic operational concepts CF cardsFormatting a new card Important CAUTION!!! Data associated with How to shut down the DM-3200 In order toBasic operational concepts Shutting down the DM-3200 Shutting down the DM-3200About projects and libraries Basic operational concepts About projects and librariesCreating a new project Setting the date and timeSystem 24 The project management Managing projects25 Storing a project Saving project dataLibrary management Basic operational concepts Library managementTarget area Target areaSOURCE area Library utilitiesOptions Setup screenBasic operational concepts Naming library entries Naming library entriesBasic operational concepts Options 30 The Setup option screenBuss AUX Encoder Mode Follows Current ScreenCurrent Screen Follows Encoder Mode SEL keys Meter layerSolo Utilities Basic operational concepts UtilitiesUtility copying 35 Utility external switch settings Switch utilityStereo digital I/O Cascade ConnectionsMIDI, control and sync connections Analog connections Connections Analog connectionsMic/line connections Digital audio I/O Connections Digital connectionsDigital connections Analog outputsDigital Setup screen Digital I/O setupConnections Other connections Slot card configurationOther connections Connections Other connections Clock setting Connections Clock settingDigital in 1/2 FireWire cardNormal High-speed Internal CascadeYes Routing & assignmentYes Yesb Routing Routing & assignment RoutingInput routing TIP Output routing Insert patching Routing & assignment Channel-to-buss assignment Assignment using the front panelChannel-to-buss assignment Buss assignments with the pan switch Off Non-channel assignments Assignments from Monitoring Routing & assignment MonitoringSelecting the CR source Studio cue source Oscillator and noise generator Talkback, etcReturn modules Full-featured modulesMeters First 24 channel modulesSoloing General principles Channel modulesGlobal module settings Channel modules Global module settingsChannels Fader or Master M/F tabs Fader controlCtrl key Channel modules Dynamics processorsDynamics processors Shift keyRelease time Step size Gates input channelsCompressor/expanders Decay time Step sizeCompressor/Expander preset library entries Preset dynamics library entriesProgram Name Comment Number Trigger settings Channel modules EQ 11 EQ library Number Title Comment EQ libraryAux and buss setup Channel modules Aux and buss setupAux send pan/balance screens linked 44.1 371.5 341.3 88.2 185.7 170.7 Channel modules Module setupModule setup Maximum delay msPhase/trim/delay Stereo linking Mute groups Fader groups Surround operations Changing surround modeSurround mode is set from the PAN/BAL Surround Mode screen Channel modules Surround operationsSurround panning 33 Surround panning pan mode on LFE level Snapshots Channel modules SnapshotsSnapshot library management Information about a snapshot Storing snapshotsEffects Setting up the effectsRouting the effects Tascam effect parameters Effects Setting up the effectsTC Works effect parameters Effects Effect libraries Preset TC Reverb effectsEffect libraries 027 Number Name LCD indication 024025 026066 Number Name LCD indication 063064 065Tascam effects Preset Tascam effectsPreset Title LCD indication Comments Guitar Compressor DistortionExciter Preset Title LCD indication CommentsPhaser CompressorMulti-tap Preset Title LCD indication Comments Delay StereoChorus 106 Pitch changer100 101Midi Midi port switching and filteringMidi Program Change messages and the DM-3200 Midi Implementation ChartsProgram Change messages and the DM-3200 Selecting devices for transport control Remote operationSelecting the control type for the devices Remote operation Selecting devices for transport controlDeleting devices from the list Auto-detection of devicesTransport mapping memories Viewing the transport mappings To use a transport mappingEditing a mapping Machine control setup Remote operation Machine control setupLocate Preroll Record Command TypeLocation memories Remote operation Location memoriesManual location Viewing a list of location memoriesRepeat play ALL Input and Auto MON Auto punch operationsAssignable Sends 1 through SpecificationsAnalog audio I/O Assignable Returns BAL 1 throughDigital audio I/O Specifications Digital audio I/OMiscellaneous I/O connections System performance Specifications EqualizationPhysical characteristics EqualizationPopup messages Specifications Dimensional drawingDimensional drawing Messages and troubleshootingSpecifications Messages and troubleshooting Shown when all grouping layers are to be cleared Shown when performing bulk setup of the channel delay timeShown when performing bulk setup of the channel LFE level Shown when undoing or redoing library operationsValid clock source has been selected Clock source has been selected, but no signal is presentLibrary preset entry has been recalled compressor/expander Results of performing a word sync checkGroups of 8 busses, or groups of 8 channels Confirmation when copying automation configurationConfirmation when performing a parameter copy operation Confirmation that the digital trim values are to be updatedInformation about a library preset entry gate Library preset entry has been recalled effectShown when undoing or redoing effect library operations Information about a library preset entry EQGroup does not exist to be used as a grouping layer Confirmation when changing between Input and Return sourcesConfirmation that the delay values are to be updated Information about a library entry gateConfirmation before deleting data Project to anotherProject bank Confirmation about the deletion of an automation fileShould this changed data be loaded? Confirmation when re-assigning a grouping layer masterConfirmation when re-assigning a fader group master Confirmation when changing a settingSnapshot preset has been recalled Digital audio data error from AES card non-audio dataDigital audio data error from AES card loss of word sync Information on a preset snapshotCurrent project cannot be renamed DM-3200 can be rebootedStored a snapshot ChangedBlock diagram Specifications Block diagramLevel diagram Specifications Level diagramPage Page DM-3200
Related manuals
Manual 2 pages 325 b Manual 4 pages 61.69 Kb

DM-3200 specifications

The Tascam DM-3200 is a versatile digital mixing console renowned for its professional audio capabilities and comprehensive feature set. Launched as a part of Tascam’s acclaimed DM series, this console has become a favorite among recording engineers and musicians for its flexibility and high-quality sound processing.

One of the standout features of the DM-3200 is its ability to handle both analog and digital audio signals seamlessly. With 32 input channels, it provides ample connectivity options that are vital for modern studios. It supports both analog line-level signals and digital inputs via ADAT, AES/EBU, and S/PDIF, which allows for extensive routing and integration with various devices and systems.

The DM-3200 features an 8-bus architecture, which enables users to create complex mixes with ease. Each channel is equipped with a 4-band parametric EQ, offering precise control over the tonal balance of each audio source. The onboard effects processing includes virtual effects such as reverb, delay, and modulation, which enhances the overall sound quality and provides creative options for mixing and mastering.

Another notable aspect of the DM-3200 is its intuitive user interface. The console features an LCD display alongside faders, knobs, and buttons designed for quick and efficient operation. The layout facilitates smooth navigation through menus, making it user-friendly for both novice and experienced engineers.

In terms of recording and playback, the DM-3200 supports 24-bit/96 kHz audio resolution, ensuring high-fidelity sound for both tracking and mixing. This capability makes it suitable for post-production, live sound, and studio work, providing high-quality audio requisite in various applications.

Tascam has integrated advanced automation features into the DM-3200, allowing users to automate fader positions, effects parameters, and more. This feature is particularly beneficial during mixing sessions where precision and repeatability are essential.

Additionally, the DM-3200 is capable of digital multitrack recording and can interface seamlessly with DAWs via FireWire, enhancing its versatility in a hybrid studio environment. Whether you are recording a band, mixing a podcast, or producing a film score, the Tascam DM-3200 stands out as a powerful tool in professional audio production.
Top Page Image Contents