Tascam DM-3200 owner manual Output routing, Routing outputs

Page 49

4 – Routing & assignment : Routing

Output routing

The output routing screen allows you to tie the logi- cal outputs from the different parts of the DM-3200 to the physical output ports.

Figure 4.3: Routing outputs

There are two such screens, one dedicated to the built-in outputs of the DM-3200, and the other dedi- cated to the outputs provided by any optional cards fitted in the slots.

Use POD 3 to select the physical terminals to which the output sources will be routed.

Select from:

•TDIF1, TDIF2, TDIF3 The three TDIF format connectors

•ADAT The optical ADAT output

•DIGITAL OUT The stereo digital outputs

•ASN SEND The four analog assignable sends

•EFF SEND1, EFF SEND2 These are not physical outputs, but virtual patches to the inputs of the internal effects.

Use the POD 4 control to select the output source. Select from:

•ALL (all of the output sources mentioned below)

•BUSS/DIRECT The 16 busses, and any direct channel outputs

•AUX The eight aux sends

•STEREO The stereo buss

There is a second selection called INPUT BYBASS, which allows you to select the same input sources as for input routing (see “Input routing” on page 47). These inputs are routed directly to the selected out- puts, just like a patchbay.

TIP

These “bypass sends” can be useful for physical format conversion, etc. For example, if you have material on a medium that can only be output in ADAT optical, for example, and you need it transmitted to your DAW which has only TDIF format inputs, with no extra pro- cessing, this feature allows you to do just that.

Slot card outputs The second page of this screen allows the selection of the output sources (including the input bypass sources) and their assignment to the outputs of the optional slot cards fitted to the DM- 3200.

The exact configuration of the outputs of the slot cards and their use depend on the actual slot card fit- ted, as well as the surround mode currently selected. For example, the FireWire expansion card (software versions after 1.0) provides up to 24 destination channels to a DAW.

Consult the documentation relating to the appropriate card(s) fitted to your system for details.

TASCAM DM-3200 User’s Manual 49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Digital Mixing Console HAZARD, do not Expose this Appliance to Rain or Moisture Important Safety Instructions Contents Routing & assignment ConnectionsChannel modules Effects SpecificationsMidi Remote operation17 Channel delay Gate/Expander preset library entriesList of Figures Supported transport machine control Effects Remote operationComputer DAW integration IntroductionOther key points Please read this manualAbout the DM-3200 Introduction About the DM-3200Channel destinations Mixer channelsUnpacking the DM-3200 Introduction Unpacking the DM-3200About the manual Introduction About the manualWhat’s in the manual Special notes for touch-sensitive faders Introduction Special notes for touch-sensitive fadersCopyright, etc Features of the DM-3200 Introduction The features of the DM-3200Modifier section Module & layer control sectionLibrary section and CF card slot Machine control sectionSmart keys Basic operational conceptsWhat’s on the screen? Explanation of the top line of screen displays Jumping to commonly-used screensSpecial controls Basic operational concepts Special controlsFader layers PODsPOD knobs used in a multi-control Screen Basic operational concepts Encoders GATE/DYN dynamics processor modeEncoders Encoder mappingsHard left Little less hard Centered Little to Left Right Reading the encoder indicatorsNo cut or boost Slight boost note Little more boost Three indicators Now off Now lit One half-litLowest frequency Middle Little higher Than middleLow shelf High shelf Peak Notch Encoder behaviorFull cut Below nominal Nominal 0dB Above nominal CF cards Basic operational concepts CF cardsFormatting a new card Basic operational concepts Shutting down the DM-3200 How to shut down the DM-3200 In order toShutting down the DM-3200 Important CAUTION!!! Data associated withAbout projects and libraries Basic operational concepts About projects and librariesCreating a new project Setting the date and timeSystem 24 The project management Managing projects25 Storing a project Saving project dataLibrary management Basic operational concepts Library managementTarget area Target areaSOURCE area Library utilitiesBasic operational concepts Naming library entries Setup screenNaming library entries OptionsBasic operational concepts Options 30 The Setup option screenCurrent Screen Follows Encoder Mode Encoder Mode Follows Current ScreenSEL keys Meter layer Buss AUXSolo Utilities Basic operational concepts UtilitiesUtility copying 35 Utility external switch settings Switch utilityStereo digital I/O Cascade ConnectionsMIDI, control and sync connections Analog connections Connections Analog connectionsMic/line connections Digital connections Connections Digital connectionsAnalog outputs Digital audio I/ODigital Setup screen Digital I/O setupConnections Other connections Slot card configurationOther connections Connections Other connections Clock setting Connections Clock settingNormal High-speed Internal FireWire cardCascade Digital in 1/2Yes Routing & assignmentYes Yesb Routing Routing & assignment RoutingInput routing TIP Output routing Insert patching Routing & assignment Channel-to-buss assignment Assignment using the front panelChannel-to-buss assignment Buss assignments with the pan switch Off Non-channel assignments Assignments from Monitoring Routing & assignment MonitoringSelecting the CR source Studio cue source Oscillator and noise generator Talkback, etcMeters Full-featured modulesFirst 24 channel modules Return modulesSoloing General principles Channel modulesGlobal module settings Channel modules Global module settingsChannels Fader or Master M/F tabs Fader controlDynamics processors Channel modules Dynamics processorsShift key Ctrl keyCompressor/expanders Gates input channelsDecay time Step size Release time Step sizeCompressor/Expander preset library entries Preset dynamics library entriesProgram Name Comment Number Trigger settings Channel modules EQ 11 EQ library Number Title Comment EQ libraryAux and buss setup Channel modules Aux and buss setupAux send pan/balance screens linked Module setup Channel modules Module setupMaximum delay ms 44.1 371.5 341.3 88.2 185.7 170.7Phase/trim/delay Stereo linking Mute groups Fader groups Surround mode is set from the PAN/BAL Surround Mode screen Changing surround modeChannel modules Surround operations Surround operationsSurround panning 33 Surround panning pan mode on LFE level Snapshots Channel modules SnapshotsSnapshot library management Information about a snapshot Storing snapshotsEffects Setting up the effectsRouting the effects Tascam effect parameters Effects Setting up the effectsTC Works effect parameters Effects Effect libraries Preset TC Reverb effectsEffect libraries 025 Number Name LCD indication 024026 027064 Number Name LCD indication 063065 066Preset Title LCD indication Comments Guitar Compressor Preset Tascam effectsDistortion Tascam effectsPhaser Preset Title LCD indication CommentsCompressor ExciterMulti-tap Preset Title LCD indication Comments Delay StereoChorus 100 Pitch changer101 106Midi Midi port switching and filteringMidi Program Change messages and the DM-3200 Midi Implementation ChartsProgram Change messages and the DM-3200 Selecting devices for transport control Remote operationDeleting devices from the list Remote operation Selecting devices for transport controlAuto-detection of devices Selecting the control type for the devicesTransport mapping memories Viewing the transport mappings To use a transport mappingEditing a mapping Machine control setup Remote operation Machine control setupLocate Preroll Record Command TypeLocation memories Remote operation Location memoriesManual location Viewing a list of location memoriesRepeat play ALL Input and Auto MON Auto punch operationsAnalog audio I/O SpecificationsAssignable Returns BAL 1 through Assignable Sends 1 throughDigital audio I/O Specifications Digital audio I/OMiscellaneous I/O connections Physical characteristics Specifications EqualizationEqualization System performanceDimensional drawing Specifications Dimensional drawingMessages and troubleshooting Popup messagesSpecifications Messages and troubleshooting Shown when performing bulk setup of the channel LFE level Shown when performing bulk setup of the channel delay timeShown when undoing or redoing library operations Shown when all grouping layers are to be clearedLibrary preset entry has been recalled compressor/expander Clock source has been selected, but no signal is presentResults of performing a word sync check Valid clock source has been selectedConfirmation when performing a parameter copy operation Confirmation when copying automation configurationConfirmation that the digital trim values are to be updated Groups of 8 busses, or groups of 8 channelsShown when undoing or redoing effect library operations Library preset entry has been recalled effectInformation about a library preset entry EQ Information about a library preset entry gateConfirmation that the delay values are to be updated Confirmation when changing between Input and Return sourcesInformation about a library entry gate Group does not exist to be used as a grouping layerProject bank Project to anotherConfirmation about the deletion of an automation file Confirmation before deleting dataConfirmation when re-assigning a fader group master Confirmation when re-assigning a grouping layer masterConfirmation when changing a setting Should this changed data be loaded?Digital audio data error from AES card loss of word sync Digital audio data error from AES card non-audio dataInformation on a preset snapshot Snapshot preset has been recalledStored a snapshot DM-3200 can be rebootedChanged Current project cannot be renamedBlock diagram Specifications Block diagramLevel diagram Specifications Level diagramPage Page DM-3200
Related manuals
Manual 2 pages 325 b Manual 4 pages 61.69 Kb

DM-3200 specifications

The Tascam DM-3200 is a versatile digital mixing console renowned for its professional audio capabilities and comprehensive feature set. Launched as a part of Tascam’s acclaimed DM series, this console has become a favorite among recording engineers and musicians for its flexibility and high-quality sound processing.

One of the standout features of the DM-3200 is its ability to handle both analog and digital audio signals seamlessly. With 32 input channels, it provides ample connectivity options that are vital for modern studios. It supports both analog line-level signals and digital inputs via ADAT, AES/EBU, and S/PDIF, which allows for extensive routing and integration with various devices and systems.

The DM-3200 features an 8-bus architecture, which enables users to create complex mixes with ease. Each channel is equipped with a 4-band parametric EQ, offering precise control over the tonal balance of each audio source. The onboard effects processing includes virtual effects such as reverb, delay, and modulation, which enhances the overall sound quality and provides creative options for mixing and mastering.

Another notable aspect of the DM-3200 is its intuitive user interface. The console features an LCD display alongside faders, knobs, and buttons designed for quick and efficient operation. The layout facilitates smooth navigation through menus, making it user-friendly for both novice and experienced engineers.

In terms of recording and playback, the DM-3200 supports 24-bit/96 kHz audio resolution, ensuring high-fidelity sound for both tracking and mixing. This capability makes it suitable for post-production, live sound, and studio work, providing high-quality audio requisite in various applications.

Tascam has integrated advanced automation features into the DM-3200, allowing users to automate fader positions, effects parameters, and more. This feature is particularly beneficial during mixing sessions where precision and repeatability are essential.

Additionally, the DM-3200 is capable of digital multitrack recording and can interface seamlessly with DAWs via FireWire, enhancing its versatility in a hybrid studio environment. Whether you are recording a band, mixing a podcast, or producing a film score, the Tascam DM-3200 stands out as a powerful tool in professional audio production.
Top Page Image Contents