Hooking Up
•Before connecting this unit to another device, be sure to unplug the AC power cord from the power outlet.
•Turn off the power switch on this unit and all components to be connected, such as keyboards and active speakers (speakers with built in amplifiers).
•After all the connections, double check that the connections are correct before plugging the AC power cord back into the power outlet.
•If the connected components output large signals that cause distortion, adjust the INPUT LEVEL knobs on this unit to lower the input level, or lower the output level of the connected component.
Example 1: Hooking up to instruments
Keyboard
Electric Guitar
Guitar
IN |
|
|
| IN |
|
|
MIDI IN
Example 2: Hooking up a mixer (Mono send, Stereo return)
| |
IN | OUT |
Effect Send | Effect Return |
(Monox2) | (Stereo x 2) |
OUT
Active | Active |
Speaker | Speaker |
| Mixer |
Active | Active |
Speaker | Speaker |
Mixer
Example 3: Hooking up to a mixer (cutting the direct sound) (Stereo send, Stereo Return)
DAT Recorders
CD Players
etc
Main Monitor Speaker System
Microphones
etc
Power Amplifier
IN
Effect Send
(Stereo x 2)
DPS-V55M Effect Return 
(Stereo x 2)
OUT
Audio Mixing Console
When using the processor in a send-return loop
•When using effect that have an effect level parameter, we recommend setting the direct sound to “0” so that only the sound of the effect will be output.
•We also recommend setting the BYPASS function to “Muting” (as shown on page 18).
9GB