Sony DPS-V55M Using the TAP function, To use TAP with time related parameters Time below

Using the TAP function

This function lets you change the value of certain time related parameters or trigger an effect by tapping on the ENTER (TAP) button.

The parameter which responds to the TAP function is different for each effect, and not all effect have compatible parameters. However, many time related parameters (such as Delay Time) or parameters activated by a trigger (such as Key Trigger) are designed to work with the TAP function. (Refer to the separate Effect Parameter Guide for specific information.)

The TAP function works the same in either play mode or edit mode, but not can not be used when any other modes (such as SYSTEM or SAVE) are active.

To use TAP with time related parameters (“Time” below)

Select a program containing a compatible effect, then tap ENTER (TAP) repeatedly to enter the desired tempo.

The effector’s tap editor measures the timing of the last two taps an sets the corresponding parameter accordingly. You can also change the ratio between your taps and the actual parameter value (see page 18 for details).

To use TAP as a trigger (“Trigger” below)

Press ENTER (TAP) at the point where you want to activate the effect.

Effects that can be adjusted using the TAP function.

Number	Name	TAP type
7	Rotary Speaker	Trigger
9	Doppler	Trigger
15	Stereo Delay	Time
16	Ping Pong Delay	Time
22	Stereo Panner	Trigger
23	Haas Panner	Trigger
31	Tremolo	Trigger
32	Vibrato	Trigger
34	Pitch Roller	Trigger
36	Freeze	Trigger

zYou can also use MIDI to control the TAP function

Data above 40H received on Control Change 04H produces the same effect as pressing ENTER (TAP) on the front panel.

15GB