Sennheiser W100 manual Indications and displays on the transmitters, Modulation display

Page 13

Indications and displays on the transmitters

Operation and battery status indication

The red LED (LOW BAT/ON) provides information on the current operating state of the transmitter:

Red LED lit up:	The transmitter is switched on and the capacity of the
	batteries/accupack BA 2015 is sufficient.

Red LED flashing: The batteries are/the accupack BA 2015 is going flat (LOW

BAT)!

In addition, the 4-step battery status display on the display panel provides information on the remaining battery/accupack BA 2015 capacity:

3 segments:	capacity approx. 100 %
2 segments:	capacity approx. 70 %
1 segment:	capacity approx. 30 %
Battery icon flashing:	LOW BAT

“MUTE” display

The “MUTE” display appears on the display panel when the transmitter is muted (see: „Muting the transmitters“ on page 23).

Modulation display

The level display for audio signal (AF) shows the modulation of the transmit- ter.

AF peak indication (SK 100 G2 only)

The yellow LED (AF PEAK) at the front of the SK 100 G2 lights up when the audio input level is excessively high (AF peak) and overmodulates the trans- mitter. At the same time, the 7-step level display for audio signal “AF” shows full deflection for the duration of the overmodulation.

“PILOT” display
The “PILOT” display	lights up when the transmitter display panel if the

pilot tone transmission is activated (see: „Activating/deactivating the pilot tone transmission or pilot tone evaluation“ on page 35).

Display backlighting (SK 100 G2 only)

After pressing a button, the display remains backlit for approx. 15 seconds.

13

Image 13

Contents 100 Thank you for choosing Sennheiser Safety instructionsContents Channel bank system Evolution wireless series ew 100 G2Delivery includes Areas of application System variantsOverview of operating controls Power buttonEM 100 G2 rack-mount receiver EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Transmitter battery status indication EM 100 G2 only Operation and battery status indication EK 100 G2 onlyRF signal indication EK 100 G2 only Indications and displays on the receiversPilot display Modulation display of the receiving transmitterDiversity display EM 100 G2 only Display backlighting EK 100 G2 onlyIndications and displays on the transmitters Operation and battery status indicationModulation display AF peak indication SK 100 G2 onlyConnecting the mains unit Connecting the antennasPreparing the components for use Mounting the receiver feetService interface Connecting the amplifier/mixing consoleRack adapter and antenna mount accessories Bottom sides of the receivers Inserting and replacing the batteries Connecting units to the audio outputMounting the bodypack receiver to a camera Connecting the microphone/line cablePositioning the microphones Attaching the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the components on/off Using the componentsSwitching the rack-mount receiver on/off Switching the bodypack receiver/transmitter on/offSwitching the radiomicrophone on/off Activating/deactivating the lock modeMuting the transmitters Muting the SK 100 G2 and SKP 100 G2 transmittersAttaching the bodypack receiver/transmitter to clothing Attaching the components to clothingButtons Operating menuOverview of menus Working with the operating menu Exit Operating menu of the receiversName Operating menu of the transmitters ExitDisply Switching between channel banks Adjustment tips for the operating menuSwitching between the channels in a channel bank Multi-channel operation Adjusting the sensitivity transmitters onlyStarting the scan and storing the scan result Releasing locked channelsAdjusting the squelch threshold receivers only Adjusting the audio output level receivers onlySpecial feature of the SKP 100 G2 plug-on transmitter Entering a name Selecting the standard displayActivating/deactivating the pilot tone transmission or Loading the factory-preset default settingsPilot tone evaluation Exiting the operating menuError checklist If problems occurRecommendations and tips For multi-channel operation Care and maintenanceHDX noise reduction Additional informationSquelch Wireless transmission systemsPilot tone squelch Field strength-dependent squelchDiversity reception System SpecificationsReceivers Transmitters Connector assignmentMicrophones Microphone headsPage Accessories Manufacturer declarations Warranty regulationsCE Declaration Conformity Batteries or rechargeable batteries