Adjustment tips for the operating menu
Switching between channel banks
BANK
Via the “BANK” menu, you can switch between the nine channel banks of the transmitters and receivers. The channel banks “1” to “8” have four switchable channels that are
When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detected on the channel with the lowest channel number (see: „Scanning the channel banks for free chan- nels (receivers only)“ on page 31), the receiver display panel automatically displays the next free channel.
Switching between the channels in a channel bank
CHAN
Via the “CHAN” menu, you can switch between the four channels in a channel bank.
Always set the transmitter and the receiver of a transmission link to the same channel. After scanning a channel bank (see: „Scanning the channel banks for free channels (receivers only)“ on page 31), only the free channels are dis- played. Set the transmitter to one of the free channels.
Selecting the frequencies to be stored in the channel bank “U”
TUNE
Via the “TUNE” menu, you can select the frequencies to be stored in the chan- nel bank “U” (user bank).
When you have selected one of the channel banks “1” to “8” and then select the “TUNE” menu, the transmitter or receiver automatically switches to channel 01 of the channel bank “U”. In this case, “U.01” briefly appears on the display.
| Use the / buttons to select the desired transmission or receiving fre- |
| quency. Transmission and receiving frequencies are tunable in |
| steps within a switching bandwidth of 36 MHz max. For intermodulation- |
| free frequencies, please refer to the enclosed frequency table. |
| Scanning the channel banks for free channels (receivers only) |
SCAN | Before putting one or several transmission links into operation, you should |
| scan the selected channel bank for free channels In order to ensure intermo- |
|
31