Sennheiser W100 manual EK 100 G2 bodypack receiver

Page 7

EK 100 G2 bodypack receiver

Operating controls

Audio output (AF OUT), 3.5 mm jack socket (unbalanced)

Antenna

Red LED for operation and

battery status indication (ON/LOW BAT)

Green LED for RF signal indication (RF)

SET button

/rocker button (DOWN/UP) Battery compartment Battery compartment cover Unlocking button

ON/OFF button

(serves as the ESC (cancel) key in the operating menu)

LC display

LC display panel

Alphanumeric display

“B.CH“ – appears when the channel bank and the channel number are displayed

“MHz“ – appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

“PILOT” display

(pilot tone evaluation is activated)

“MUTE” display

(audio output is muted)

7-step level display for received audio signal “AF”

7-step level display for received RF signal “RF”

7

Image 7

Contents 100 Thank you for choosing Sennheiser Safety instructionsContents Channel bank system Evolution wireless series ew 100 G2Delivery includes Areas of application System variantsOverview of operating controls Power buttonEM 100 G2 rack-mount receiver EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Indications and displays on the receivers Operation and battery status indication EK 100 G2 onlyTransmitter battery status indication EM 100 G2 only RF signal indication EK 100 G2 onlyDisplay backlighting EK 100 G2 only Modulation display of the receiving transmitterPilot display Diversity display EM 100 G2 onlyAF peak indication SK 100 G2 only Operation and battery status indicationIndications and displays on the transmitters Modulation displayMounting the receiver feet Connecting the antennasConnecting the mains unit Preparing the components for useService interface Connecting the amplifier/mixing consoleRack adapter and antenna mount accessories Bottom sides of the receivers Inserting and replacing the batteries Connecting units to the audio outputMounting the bodypack receiver to a camera Connecting the microphone/line cablePositioning the microphones Attaching the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the bodypack receiver/transmitter on/off Using the componentsSwitching the components on/off Switching the rack-mount receiver on/offMuting the SK 100 G2 and SKP 100 G2 transmitters Activating/deactivating the lock modeSwitching the radiomicrophone on/off Muting the transmittersAttaching the bodypack receiver/transmitter to clothing Attaching the components to clothingButtons Operating menuOverview of menus Working with the operating menu Exit Operating menu of the receiversName Operating menu of the transmitters ExitDisply Switching between channel banks Adjustment tips for the operating menuSwitching between the channels in a channel bank Releasing locked channels Adjusting the sensitivity transmitters onlyMulti-channel operation Starting the scan and storing the scan resultAdjusting the squelch threshold receivers only Adjusting the audio output level receivers onlySpecial feature of the SKP 100 G2 plug-on transmitter Entering a name Selecting the standard displayExiting the operating menu Loading the factory-preset default settingsActivating/deactivating the pilot tone transmission or Pilot tone evaluationError checklist If problems occurRecommendations and tips For multi-channel operation Care and maintenanceHDX noise reduction Additional informationField strength-dependent squelch Wireless transmission systemsSquelch Pilot tone squelchDiversity reception System SpecificationsReceivers Microphone heads Connector assignmentTransmitters MicrophonesPage Accessories Batteries or rechargeable batteries Warranty regulationsManufacturer declarations CE Declaration Conformity