Sennheiser W100 manual Loading the factory-preset default settings, Pilot tone evaluation

Page 35

	Loading the factory-preset default settings
RESET	Via the “RESET” menu, you can load the factory-preset default settings. Only
	the selected setting for the pilot tone remains unchanged. After the reset, the
	unit is restarted and the standard display is shown on the display panel.

	Activating/deactivating the pilot tone transmission or
	pilot tone evaluation
PILOT	Via the “PILOT” menu, you can activate or deactivate the pilot tone transmis-
	sion of the transmitters and the pilot tone evaluation of the receivers.
	The pilot tone supports the squelch function (SQELCH) and protects against
	interference due to RF signals from other units. The transmitter adds an inau-
	dible signal, known as the pilot tone, to the transmitted signal. The receiver
	detects and evaluates the pilot tone, and is thus able to identify the signal of
	the matching transmitter and mute all others.
	Transmitters of the ew 100 series (first generation) do not transmit a pilot
	tone and receivers of the ew 100 series (first generation) cannot evaluate
	the pilot tone. Nevertheless, you can combine units of the ew 100 series (first
	generation) with units of the ew 100 G2 series (second generation).
	However, when combining units, please observe the following:
	y With an ew 100 G2 transmitter and an ew 100 G2 receiver:
	Activate the pilot tone function with both transmitter and receiver.
	y With an ew 100 transmitter and an ew 100 G2 receiver or vice versa:
	Deactivate the pilot tone function with the ew 100 G2 transmitter or recei-
	ver.

	Activating/deactivating the lock mode
LOCK	Via the “LOCK” menu, you can activate or deactiveate the lock mode.

EM 100 G2

The lock mode prevents that the transmitter or receiver is accidentally pro- grammed or switched off during operation. The lock mode icon on the display indicates that the lock mode is activated.

To deactivate the lock mode, first press the SET button. Then press the / buttons to select “Lock Off”.If you confirm your selection by pressing the SET button, “LOC.OFF” appears on the display and the buttons can be operated as usual.

EK 100 G2

Trans- mitters

Exiting the operating menu

Via the “EXIT” menu, you can exit the operating menu and return to the stan- dard display.

35

Image 35

Contents 100 Thank you for choosing Sennheiser Safety instructionsContents Channel bank system Evolution wireless series ew 100 G2Delivery includes Areas of application System variantsEM 100 G2 rack-mount receiver Power buttonOverview of operating controls EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Indications and displays on the receivers Operation and battery status indication EK 100 G2 onlyTransmitter battery status indication EM 100 G2 only RF signal indication EK 100 G2 onlyDisplay backlighting EK 100 G2 only Modulation display of the receiving transmitterPilot display Diversity display EM 100 G2 onlyAF peak indication SK 100 G2 only Operation and battery status indicationIndications and displays on the transmitters Modulation displayMounting the receiver feet Connecting the antennasConnecting the mains unit Preparing the components for useRack adapter and antenna mount accessories Connecting the amplifier/mixing consoleService interface Bottom sides of the receivers Inserting and replacing the batteries Connecting units to the audio outputMounting the bodypack receiver to a camera Connecting the microphone/line cablePositioning the microphones Attaching the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the bodypack receiver/transmitter on/off Using the componentsSwitching the components on/off Switching the rack-mount receiver on/offMuting the SK 100 G2 and SKP 100 G2 transmitters Activating/deactivating the lock modeSwitching the radiomicrophone on/off Muting the transmittersAttaching the bodypack receiver/transmitter to clothing Attaching the components to clothingOverview of menus Operating menuButtons Working with the operating menu Exit Operating menu of the receiversName Operating menu of the transmitters ExitDisply Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Releasing locked channels Adjusting the sensitivity transmitters onlyMulti-channel operation Starting the scan and storing the scan resultSpecial feature of the SKP 100 G2 plug-on transmitter Adjusting the audio output level receivers onlyAdjusting the squelch threshold receivers only Entering a name Selecting the standard displayExiting the operating menu Loading the factory-preset default settingsActivating/deactivating the pilot tone transmission or Pilot tone evaluationError checklist If problems occurRecommendations and tips For multi-channel operation Care and maintenanceHDX noise reduction Additional informationField strength-dependent squelch Wireless transmission systemsSquelch Pilot tone squelchDiversity reception Receivers SpecificationsSystem Microphone heads Connector assignmentTransmitters MicrophonesPage Accessories Batteries or rechargeable batteries Warranty regulationsManufacturer declarations CE Declaration Conformity