Sennheiser W100 manual Working with the operating menu

Page 26

EM 100 G2

Working with the operating menu

By way of example of the “TUNE” menu, this section describes how to use the operating menu.

After switching the unit on, the standard display is shown on the display panel.

EK 100 G2

Trans- mitters

Getting into the operating menu

Press the SET button to get from the standard display into the operating menu. The last menu selected flashes on the display.

Selecting a menu

Press the / buttons to select a menu.

Press the SET button to get into the setting mode of the selected menu. The current setting that can be adjusted flashes on the display.

Adjusting a setting

Press the / buttons to adjust the setting. By briefly pressing the / buttons, the display jumps either forwards or backwards to the next set- ting. In the “CHAN”, “TUNE” and “NAME” menu, the / buttons feature a “fast search” function. If you hold down a button, the display cycles con- tinuously. The “fast search” function allows you to get fast and easily to your desired setting. The new setting flashes on the display until it is stored.

Storing a setting

Press the SET button to store the setting. “STORED” appears on the dis- play, indicating that the setting has been stored. The display then returns to the previous menu level.

With most menus, new settings become effective immediately without having to be stored. An exception are the “BANK”, “CHAN”, “TUNE” and “RESET” menus of the transmitters and the “RESET” menu of the recei- vers. With these menus, new settings only become effective after they have been stored (“STORED” appears on the display, indicating that the setting has been stored).

Exiting the operating menu

Select the “EXIT” menu to exit the operating menu and to return to the standard display.

When you have entered the operating menu, the ON/OFF button or the POWER button (EM 100 G2 receiver only) serves as the ESC (cancel) key, i.e. by briefly pressing the ON/OFF or POWER button, you cancel your entry and return to the standard display.

26

Image 26

Contents 100 Safety instructions Thank you for choosing SennheiserContents Evolution wireless series ew 100 G2 Channel bank systemSystem variants Delivery includes Areas of applicationEM 100 G2 rack-mount receiver Power buttonOverview of operating controls EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone RF signal indication EK 100 G2 only Operation and battery status indication EK 100 G2 onlyTransmitter battery status indication EM 100 G2 only Indications and displays on the receiversDiversity display EM 100 G2 only Modulation display of the receiving transmitterPilot display Display backlighting EK 100 G2 onlyModulation display Operation and battery status indicationIndications and displays on the transmitters AF peak indication SK 100 G2 onlyPreparing the components for use Connecting the antennasConnecting the mains unit Mounting the receiver feetRack adapter and antenna mount accessories Connecting the amplifier/mixing consoleService interface Bottom sides of the receivers Connecting units to the audio output Inserting and replacing the batteriesConnecting the microphone/line cable Mounting the bodypack receiver to a cameraAttaching the microphones Positioning the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the rack-mount receiver on/off Using the componentsSwitching the components on/off Switching the bodypack receiver/transmitter on/offMuting the transmitters Activating/deactivating the lock modeSwitching the radiomicrophone on/off Muting the SK 100 G2 and SKP 100 G2 transmittersAttaching the components to clothing Attaching the bodypack receiver/transmitter to clothingOverview of menus Operating menuButtons Working with the operating menu Operating menu of the receivers ExitName Exit Operating menu of the transmittersDisply Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Starting the scan and storing the scan result Adjusting the sensitivity transmitters onlyMulti-channel operation Releasing locked channelsSpecial feature of the SKP 100 G2 plug-on transmitter Adjusting the audio output level receivers onlyAdjusting the squelch threshold receivers only Selecting the standard display Entering a namePilot tone evaluation Loading the factory-preset default settingsActivating/deactivating the pilot tone transmission or Exiting the operating menuIf problems occur Error checklistRecommendations and tips Care and maintenance For multi-channel operationAdditional information HDX noise reductionPilot tone squelch Wireless transmission systemsSquelch Field strength-dependent squelchDiversity reception Receivers SpecificationsSystem Microphones Connector assignmentTransmitters Microphone headsPage Accessories CE Declaration Conformity Warranty regulationsManufacturer declarations Batteries or rechargeable batteries