Sennheiser W100 manual Connector assignment, Transmitters, Microphones, Microphone heads

Transmitters
RF characteristics
		SK 100 G2		SKP 100 G2		SKM 100 G2
RF output power at 50 Ω		typ. 30 mW
AF characteristics
Max. input voltage (at peak deviation)
Microphone		1.8 Vrms, unbalanced		1.2 Veff, unbalanced		–
Line		2.4 Vrms		–		–
Input impedance
Microphone		10 kΩ, unbalanced		10 kΩ, unbalanced		–
Line		1 MΩ		–		–
Overall device
Power supply		2 AA size batteries, 1.5 V
Nominal voltage		2.4 V		2.4 V		2.4 V
Max. power consumption at nominal voltage		≤ 170 mA
Power consumption with		≤ 250 μA		≤ 250 μA		≤ 250 μA
switched-off transmitter
Operating time (with batteries)		> 8 h		> 8 h		> 8 h
Operating time (with BA 2015 accupack)		> 8 h		> 8 h		> 8 h
Dimensions [mm]		82 x 64 x 24		105 x 43 x 43		∅ 50 x 225
Weight (incl. batteries)		approx. 158 g		approx. 195 g		approx. 450g
Microphones
Transducer principle	ME 2		ME 3		ME 4
	condenser		condenser		condenser
Sensitivity	20 mV/Pa		1.6 mV/Pa		40 mV/Pa
Pick-up pattern	omni-driectional		super-cardioid		cardioid
Max. SPL	130 dB SPL		150 dB SPL		120 dB SPL
Microphone heads
Transducer principle	MD 835		MD 845		ME 865
	dynamic		dynamic		condenser
Sensitivity	1.5 mV/Pa		1 mV/Pa		3 mV/Pa
Pick-up pattern	cardioid		super-cardioid		super-cardioid
Max. SPL	150 dB SPL		154 dB SPL		144 dB SPL
Color of identification ring	green		blue		red

Connector assignment

EM 100 G2:	EM 100 G2:
¼’’ (6.3 mm) stereo jack	¼’’ (6.3 mm) mono jack
plug, unbalanced	plug, unbalanced

EM 100 G2:		EM 100 G2:
XLR-3F connector, balanced		DC connector for
		power supply
+	2 1
	3

NC/GN D

SK 100 G2:	EK 100 G2:
3.5 mm jack plug	3.5 mm stereo jack plug,
	unbalanced

EK 100 G2:

3.5mm mono jack plug, unbalanced

43