Sennheiser W100 manual Changing the microphone head

Page 21

Changing the microphone head

First remove the batteries/accupack as described above and leave the radiomicrophone open.

Unscrew the sound inlet basket.

Loosen the screw and put it to one side.

Gently ease the capsule out of the contacts and then pull it out of the hou- sing as shown. Do not touch the contacts and the diaphragm!

Insert the new capsule.

Secure the capsule by tightening the screw.

Note:

The screw mechanically secures the microphone capsule. If the screw is missing, malfunctions may occur during tough use.

Put on the sound inlet basket and identification ring supplied with the new microphone head (NB: do NOT use the old basket, as the different heads use slightly differing internal foam) and screw it tight.

Insert the batteries/accupack.

Close the radiomicrophone and put it into operation.

Note:

Microphone capsule, sound inlet basket and foam insert form an acoustic unit and must therefore always be exchanged all together. Each micro- phone head comes with a color-coded identification ring to distinguish different microphone heads from each other (green = MD 835, blue = MD 845, red = ME 865).

21

Image 21

Contents 100 Thank you for choosing Sennheiser Safety instructionsContents Channel bank system Evolution wireless series ew 100 G2Delivery includes Areas of application System variantsPower button Overview of operating controlsEM 100 G2 rack-mount receiver EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Transmitter battery status indication EM 100 G2 only Operation and battery status indication EK 100 G2 onlyRF signal indication EK 100 G2 only Indications and displays on the receiversPilot display Modulation display of the receiving transmitterDiversity display EM 100 G2 only Display backlighting EK 100 G2 onlyIndications and displays on the transmitters Operation and battery status indicationModulation display AF peak indication SK 100 G2 onlyConnecting the mains unit Connecting the antennasPreparing the components for use Mounting the receiver feetConnecting the amplifier/mixing console Service interfaceRack adapter and antenna mount accessories Bottom sides of the receivers Inserting and replacing the batteries Connecting units to the audio outputMounting the bodypack receiver to a camera Connecting the microphone/line cablePositioning the microphones Attaching the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the components on/off Using the componentsSwitching the rack-mount receiver on/off Switching the bodypack receiver/transmitter on/offSwitching the radiomicrophone on/off Activating/deactivating the lock modeMuting the transmitters Muting the SK 100 G2 and SKP 100 G2 transmittersAttaching the bodypack receiver/transmitter to clothing Attaching the components to clothingOperating menu ButtonsOverview of menus Working with the operating menu Exit Operating menu of the receiversName Operating menu of the transmitters ExitDisply Adjustment tips for the operating menu Switching between channel banksSwitching between the channels in a channel bank Multi-channel operation Adjusting the sensitivity transmitters onlyStarting the scan and storing the scan result Releasing locked channelsAdjusting the audio output level receivers only Adjusting the squelch threshold receivers onlySpecial feature of the SKP 100 G2 plug-on transmitter Entering a name Selecting the standard displayActivating/deactivating the pilot tone transmission or Loading the factory-preset default settingsPilot tone evaluation Exiting the operating menuError checklist If problems occurRecommendations and tips For multi-channel operation Care and maintenanceHDX noise reduction Additional informationSquelch Wireless transmission systemsPilot tone squelch Field strength-dependent squelchDiversity reception Specifications SystemReceivers Transmitters Connector assignmentMicrophones Microphone headsPage Accessories Manufacturer declarations Warranty regulationsCE Declaration Conformity Batteries or rechargeable batteries