Sennheiser W100 manual Using the components, Switching the components on/off

Page 22

Using the components

Switching the components on/off

The ew 100 G2 transmitters and receivers can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON/OFF button or the POWER button (EM 100 G2 only) serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display.

Note:

Remove the batteries or the accupack when the units will not be used for extended periods of time.

Switching the rack-mount receiver on/off

Press the POWER button to switch the receiver on.

To switch the receiver off, press the POWER button until “OFF” appears on the display.

Switching the bodypack receiver/transmitter on/off

Press the two unlocking buttons	and open the battery compartment
cover .

Press the ON/OFF button to switch the bodypack receiver/transmitter on. The red LED lights up.

To switch the bodypack receiver/transmitter off, press the ON/OFF button until “OFF” appears on the display. The red LED goes off.

Close the battery compartment. The battery compartment cover locks into place with an audible click.

Switching the plug-on transmitter on/off

Press the ON/OFF button to switch the plug-on transmitter on. The red

LED lights up.

To switch the plug-on transmitter off, press the ON/OFF button	until
“OFF” appears on the display. The red LED goes off.

22

Image 22

Contents 100 Safety instructions Thank you for choosing SennheiserContents Evolution wireless series ew 100 G2 Channel bank systemSystem variants Delivery includes Areas of applicationOverview of operating controls Power buttonEM 100 G2 rack-mount receiver EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone RF signal indication EK 100 G2 only Operation and battery status indication EK 100 G2 onlyTransmitter battery status indication EM 100 G2 only Indications and displays on the receiversDiversity display EM 100 G2 only Modulation display of the receiving transmitterPilot display Display backlighting EK 100 G2 onlyModulation display Operation and battery status indicationIndications and displays on the transmitters AF peak indication SK 100 G2 onlyPreparing the components for use Connecting the antennasConnecting the mains unit Mounting the receiver feetService interface Connecting the amplifier/mixing consoleRack adapter and antenna mount accessories Bottom sides of the receivers Connecting units to the audio output Inserting and replacing the batteriesConnecting the microphone/line cable Mounting the bodypack receiver to a cameraAttaching the microphones Positioning the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the rack-mount receiver on/off Using the componentsSwitching the components on/off Switching the bodypack receiver/transmitter on/offMuting the transmitters Activating/deactivating the lock modeSwitching the radiomicrophone on/off Muting the SK 100 G2 and SKP 100 G2 transmittersAttaching the components to clothing Attaching the bodypack receiver/transmitter to clothingButtons Operating menuOverview of menus Working with the operating menu Operating menu of the receivers ExitName Exit Operating menu of the transmittersDisply Switching between channel banks Adjustment tips for the operating menuSwitching between the channels in a channel bank Starting the scan and storing the scan result Adjusting the sensitivity transmitters onlyMulti-channel operation Releasing locked channelsAdjusting the squelch threshold receivers only Adjusting the audio output level receivers onlySpecial feature of the SKP 100 G2 plug-on transmitter Selecting the standard display Entering a namePilot tone evaluation Loading the factory-preset default settingsActivating/deactivating the pilot tone transmission or Exiting the operating menuIf problems occur Error checklistRecommendations and tips Care and maintenance For multi-channel operationAdditional information HDX noise reductionPilot tone squelch Wireless transmission systemsSquelch Field strength-dependent squelchDiversity reception System SpecificationsReceivers Microphones Connector assignmentTransmitters Microphone headsPage Accessories CE Declaration Conformity Warranty regulationsManufacturer declarations Batteries or rechargeable batteries