Sennheiser W100 SKM 100 G2 radiomicrophone, Plugging the plug-on transmitter onto a microphone

Page 20

Plugging the plug-on transmitter onto a microphone

Plugthe transmitter’sXLR-3F socket onto the microphone’s XLR-3Msocket.

Tighten the locking ring as shown in the diagram on the left.

Note:

The transmitter uses the microphone body as an antenna – therefore only microphones with a metal casing should be used for best signal transmission.

SKM 100 G2 radiomicrophone

Inserting and replacing the batteries

For powering the SKM 100 G2 radiomicrophone, you can either use two 1.5 V

AA size batteries or the rechargeable Sennheiser BA 2015 accupack.

Unscrew the display section	from the radiomicrophone’s body	by
turning it counterclockwise.
Slide back the display section	as far as it will go.

Open the battery compartment cover .

Insert the two batteries or the BA 2015 accupack as shown in the diagram on the left. Please observe correct polarity when inserting the batteries/ accupack.

Close the battery compartment cover .

Push the battery compartment into the radiomicrophone’s body.

Screw the display section tight.

Note:

For important informations on charging the accupack see: „Inserting and replacing the batteries“ on page 19.

20

Image 20

Contents 100 Safety instructions Thank you for choosing SennheiserContents Evolution wireless series ew 100 G2 Channel bank systemSystem variants Delivery includes Areas of applicationEM 100 G2 rack-mount receiver Power buttonOverview of operating controls EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Operation and battery status indication EK 100 G2 only Transmitter battery status indication EM 100 G2 onlyRF signal indication EK 100 G2 only Indications and displays on the receiversModulation display of the receiving transmitter Pilot displayDiversity display EM 100 G2 only Display backlighting EK 100 G2 onlyOperation and battery status indication Indications and displays on the transmittersModulation display AF peak indication SK 100 G2 onlyConnecting the antennas Connecting the mains unitPreparing the components for use Mounting the receiver feetRack adapter and antenna mount accessories Connecting the amplifier/mixing consoleService interface Bottom sides of the receivers Connecting units to the audio output Inserting and replacing the batteriesConnecting the microphone/line cable Mounting the bodypack receiver to a cameraAttaching the microphones Positioning the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Using the components Switching the components on/offSwitching the rack-mount receiver on/off Switching the bodypack receiver/transmitter on/offActivating/deactivating the lock mode Switching the radiomicrophone on/offMuting the transmitters Muting the SK 100 G2 and SKP 100 G2 transmittersAttaching the components to clothing Attaching the bodypack receiver/transmitter to clothingOverview of menus Operating menuButtons Working with the operating menu Operating menu of the receivers ExitName Exit Operating menu of the transmittersDisply Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Adjusting the sensitivity transmitters only Multi-channel operationStarting the scan and storing the scan result Releasing locked channelsSpecial feature of the SKP 100 G2 plug-on transmitter Adjusting the audio output level receivers onlyAdjusting the squelch threshold receivers only Selecting the standard display Entering a nameLoading the factory-preset default settings Activating/deactivating the pilot tone transmission orPilot tone evaluation Exiting the operating menuIf problems occur Error checklistRecommendations and tips Care and maintenance For multi-channel operationAdditional information HDX noise reductionWireless transmission systems SquelchPilot tone squelch Field strength-dependent squelchDiversity reception Receivers SpecificationsSystem Connector assignment TransmittersMicrophones Microphone headsPage Accessories Warranty regulations Manufacturer declarationsCE Declaration Conformity Batteries or rechargeable batteries