Sennheiser W100 manual Muting the transmitters, Activating/deactivating the lock mode

Page 23

Switching the radiomicrophone on/off

Turn the protective cap at the bottom of the radiomicrophone so that the ON/OFF button becomes accessible.

Press the ON/OFF button to switch the radiomicrophone on. The red LED lights up.

To switch the radiomicrophone off, press the ON/OFF button	until
“OFF” appears on the display. The red LED goes off.

Muting the transmitters

All transmitters have a MUTE switch that noiselessly mutes the transmitter’s

audio signal without switching the transmitter off.

SK 100 G2

Muting the SK 100 G2 and SKP 100 G2 transmitters

Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the “MUTE” display also appears on the receiver display panel.

	Set the MUTE switch back to the original position to retransmit the audio
SKP 100 G2	signal.

Muting the SKM 100 G2 radiomicrophone

Turn the protective cap at the bottom of the radiomicrophone so that the MUTE switch becomes accessible.

Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the “MUTE” display also appears on the receiver display panel.

Set the MUTE switch back to the original position to retransmit the audio signal.

Activating/deactivating the lock mode

All transmitters and receivers have a lock mode that can be activated or deac- tivated via the operating menu (see: „Activating/deactivating the lock mode“ on page 35). The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation.

23

Image 23

Contents 100 Thank you for choosing Sennheiser Safety instructionsContents Channel bank system Evolution wireless series ew 100 G2Delivery includes Areas of application System variantsEM 100 G2 rack-mount receiver Power buttonOverview of operating controls EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Indications and displays on the receivers Operation and battery status indication EK 100 G2 onlyTransmitter battery status indication EM 100 G2 only RF signal indication EK 100 G2 onlyDisplay backlighting EK 100 G2 only Modulation display of the receiving transmitterPilot display Diversity display EM 100 G2 onlyAF peak indication SK 100 G2 only Operation and battery status indicationIndications and displays on the transmitters Modulation displayMounting the receiver feet Connecting the antennasConnecting the mains unit Preparing the components for useRack adapter and antenna mount accessories Connecting the amplifier/mixing consoleService interface Bottom sides of the receivers Inserting and replacing the batteries Connecting units to the audio outputMounting the bodypack receiver to a camera Connecting the microphone/line cablePositioning the microphones Attaching the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the bodypack receiver/transmitter on/off Using the componentsSwitching the components on/off Switching the rack-mount receiver on/offMuting the SK 100 G2 and SKP 100 G2 transmitters Activating/deactivating the lock modeSwitching the radiomicrophone on/off Muting the transmittersAttaching the bodypack receiver/transmitter to clothing Attaching the components to clothingOverview of menus Operating menuButtons Working with the operating menu Exit Operating menu of the receiversName Operating menu of the transmitters ExitDisply Switching between the channels in a channel bank Adjustment tips for the operating menuSwitching between channel banks Releasing locked channels Adjusting the sensitivity transmitters onlyMulti-channel operation Starting the scan and storing the scan resultSpecial feature of the SKP 100 G2 plug-on transmitter Adjusting the audio output level receivers onlyAdjusting the squelch threshold receivers only Entering a name Selecting the standard displayExiting the operating menu Loading the factory-preset default settingsActivating/deactivating the pilot tone transmission or Pilot tone evaluationError checklist If problems occurRecommendations and tips For multi-channel operation Care and maintenanceHDX noise reduction Additional informationField strength-dependent squelch Wireless transmission systemsSquelch Pilot tone squelchDiversity reception Receivers SpecificationsSystem Microphone heads Connector assignmentTransmitters MicrophonesPage Accessories Batteries or rechargeable batteries Warranty regulationsManufacturer declarations CE Declaration Conformity