Sennheiser W100 manual Contents

Page 3

Contents
Safety instructions	2
Contents	3
The evolution wireless series ew 100 G2	4
The channel bank system	4
System variants	5
Overview of operating controls	6
EM 100 G2 rack-mount receiver	6
EK 100 G2 bodypack receiver	7
SK 100 G2 bodypack transmitter	8
SKP 100 G2 plug-on transmitter	9
SKM 100 G2 radiomicrophone	10
Indications and displays on the receivers	11
Indications and displays on the transmitters	13
Preparing the components for use	14
EM 100 G2 rack-mount receiver	14
EK 100 G2 bodypack receiver	17
SK 100 G2 bodypack transmitter	18
SKP 100 G2 plug-on transmitter	19
SKM 100 G2 radiomicrophone	20
Using the components	22
Switching the components on/off	22
Muting the transmitters	23
Activating/deactivating the lock mode	23
Attaching the components to clothing	24
The operating menu	25
The buttons	25
Overview of menus	25
Working with the operating menu	26
Operating menu of the receivers	27
Operating menu of the transmitters	29
Adjustment tips for the operating menu	31
Switching between channel banks	31
Switching between the channels in a channel bank	31
Selecting the frequencies to be stored in the channel bank “U”	31
Scanning the channel banks for free channels (receivers only)	31
Multi-channel operation	32
Adjusting the sensitivity (transmitters only)	32
Adjusting the audio output level (receivers only)	33
Adjusting the squelch threshold (receivers only)	33
Selecting the standard display	34
Entering a name	34
Loading the factory-preset default settings	35
Activating/deactivating the pilot tone transmission or pilot tone evaluation ..	35
Activating/deactivating the lock mode	35
Exiting the operating menu	35
If problems occur	36
Error checklist	36
Recommendations and tips	37
Care and maintenance	38
Additional information	39
HDX noise reduction	39
Wireless transmission systems	40
Squelch	40
Diversity reception	41
Specifications	42
Connector assignment	43
Polar diagrams and frequency response curves of
microphones/microphone heads	44
Accessories	45
Manufacturer declarations	46
Warranty regulations	46
CE Declaration of Conformity	46
Batteries or rechargeable batteries	46
WEEE Declaration	46

3

Image 3

Contents 100 Thank you for choosing Sennheiser Safety instructionsContents Channel bank system Evolution wireless series ew 100 G2Delivery includes Areas of application System variantsPower button Overview of operating controlsEM 100 G2 rack-mount receiver EK 100 G2 bodypack receiver SK 100 G2 bodypack transmitter SKP 100 G2 plug-on transmitter SKM 100 G2 radiomicrophone Indications and displays on the receivers Operation and battery status indication EK 100 G2 onlyTransmitter battery status indication EM 100 G2 only RF signal indication EK 100 G2 onlyDisplay backlighting EK 100 G2 only Modulation display of the receiving transmitterPilot display Diversity display EM 100 G2 onlyAF peak indication SK 100 G2 only Operation and battery status indicationIndications and displays on the transmitters Modulation displayMounting the receiver feet Connecting the antennasConnecting the mains unit Preparing the components for useConnecting the amplifier/mixing console Service interfaceRack adapter and antenna mount accessories Bottom sides of the receivers Inserting and replacing the batteries Connecting units to the audio outputMounting the bodypack receiver to a camera Connecting the microphone/line cablePositioning the microphones Attaching the microphonesPlugging the plug-on transmitter onto a microphone Changing the microphone head Switching the bodypack receiver/transmitter on/off Using the componentsSwitching the components on/off Switching the rack-mount receiver on/offMuting the SK 100 G2 and SKP 100 G2 transmitters Activating/deactivating the lock modeSwitching the radiomicrophone on/off Muting the transmittersAttaching the bodypack receiver/transmitter to clothing Attaching the components to clothingOperating menu ButtonsOverview of menus Working with the operating menu Exit Operating menu of the receiversName Operating menu of the transmitters ExitDisply Adjustment tips for the operating menu Switching between channel banksSwitching between the channels in a channel bank Releasing locked channels Adjusting the sensitivity transmitters onlyMulti-channel operation Starting the scan and storing the scan resultAdjusting the audio output level receivers only Adjusting the squelch threshold receivers onlySpecial feature of the SKP 100 G2 plug-on transmitter Entering a name Selecting the standard displayExiting the operating menu Loading the factory-preset default settingsActivating/deactivating the pilot tone transmission or Pilot tone evaluationError checklist If problems occurRecommendations and tips For multi-channel operation Care and maintenanceHDX noise reduction Additional informationField strength-dependent squelch Wireless transmission systemsSquelch Pilot tone squelchDiversity reception Specifications SystemReceivers Microphone heads Connector assignmentTransmitters MicrophonesPage Accessories Batteries or rechargeable batteries Warranty regulationsManufacturer declarations CE Declaration Conformity