Telex Q II - FOH specifications Routing and Status PAN, Mono, Lcr

ROUTING AND STATUS

PAN

In normal mode and with the PAN set to centre, equal levels are sent to both sides of the stereo mix or to ODD and EVEN groups that are in use, with a 4.5dB drop relative to fully clockwise or anti- clockwise. Setting the PAN control fully anticlockwise sends full level to the Left bus, cutting the send to the Right bus; fully clockwise rotation sends full level to the Right bus, cutting the feed to Left.

L/R

Routes the post-fade, post-pan channel signal to the main stereo mix bus, with led indication. The PAN control is automatically inserted into circuit.

MONO

Routes the post-fade, post-pan channel signal to the main mono mix bus, with led indication.

PAN

Switches the PAN control in circuit across odd and even group buses, with led indication.

LCR

Changes the mode of the pan pot from conventional stereo (L/R panning as described above to Left-Centre-Right mode. In this mode, the pan control acts across all three main buses, using the mono bus as a centre bus. When the pan is fully anti-clockwise, signal is sent only to the left bus, with no signal to centre or right buses. In the centre, signal is sent only to the centre (mono) bus, with no signal to left or right buses. When fully clockwise, signal is only sent to the right bus, with no signal sent to left or centre buses.

If a pair of groups (eg 1 and 2) is selected, the pan also acts in LCR mode, but without a centre output from the groups unless the LCR group modules are fitted.

11	24
Q2 OPERATIONAND MAINTENANCE MANUAL 9601