Telex Q II - FOH specifications Connectors and PIN Assignments, MIC Input, Line Input, Insert Send

CONNECTORS AND PIN ASSIGNMENTS

MIC INPUT		:XLR type 3 pin connectors, Balanced
Nominal level			: -56dBu to -8dBu
Pin 1 - Ground
Pin 2 - Signal +ve			(hot)
Pin 3 - Signal -ve			(cold)
Input impedance :			>2k.
LINE INPUT		:1/4" TRS Jack Socket, 'A' Guage, Balanced
Nominal Input Level : +4dBu
Tip	: Signal +ve (Hot)
Ring	: Signal -ve (Cold)
Sleeve: Ground
Input Impedance :			>10 kOhm

INSERT SEND :

1/4" TRS Jack socket, ‘A’ Gauge, Balanced Nominal Output level: +4dBu

Tip	: Signal +ve (Hot)
Ring	: Signal -ve (Cold)
Sleeve: Ground
Output Impedance:		<75 Ohm

INSERT RETURN :

1/4" TRS Jack Socket, ‘A’ Gauge, Balanced Nominal Input Level: +4dBu

Tip	: Signal +ve (Hot)
Ring	: Signal -ve (Cold)
Sleeve: Ground
Input Impedance :		>10 kOhm

DIRECT OUTPUT : 1/4" TRS Jack socket, ‘A’ Gauge, Balanced

Nominal Output level: +4dBu

Tip	: Signal +ve (Hot)
Ring	: Signal -ve (Cold)
Sleeve: Ground
Output Impedance:		< 75 Ohm

Q2 OPERATIONAND MAINTENANCE MANUAL 9601 27