Telex Q II - FOH specifications Sub/Lcr, Matrix Send PRE

Page 38

SUB/LCR

Routes the group signal to the main Stereo (Left/Right) and main Mono (centre) buses, with led indication.

ON

The ON switch enables the group output, and is indicated by an led in the switch when the output is active. Internal links allow the ON switch to be configured as a group CUT.

MATRIX SEND PRE

Allows the Group input to the Matrix to be fed pre-fader, rather than post-fader.

CUE/SOLO

Solo’s the Group signal to the main monitors (headphones or loudspeakers), with flashing led indication. See the Input Module for a functional description of the solo button.

MUTE SAFE (Not active in VCA consoles)

Prevents the Mute Group (or scene preset) master from muting the channel, and may be used to locally override muted channels.

VCA/MUTE GROUP 1 ASSIGN

Assigns the channel mute to VCA/Mute Group 1, with led indication. Similarly for assigns 2, 3, 4, 5, 6, 7 and 8. If the VCA option is fitted then the channel level will depend upon the position of the channel fader and the VCA group master.

Internal links allow the MUTE GROUPS to become SCENE PRESETS, that is when a MASTER is pressed, all assigned channels are switched ON, not muted.

Q2 OPERATIONAND MAINTENANCE MANUAL 9601

38

Image 38

Contents II FOH Contents Declaration of Conformity General Information Left Centre RightQ2 in USE Left Centre Right Effects Matrix Outputs Warranty Q2 Operationand Maintenance Manual Dimensions Frequency Response SpecificationsMaximum Gain DistortionQ2 Operationand Maintenance Manual Wiring Considerations Grounding Q2 Operationand Maintenance Manual Do not Disconnect the Mains Earth Cables Module Descriptions CUE Interlock Mode Master CUE Reset Matrix Section 20DB PAD Input Module LO MID EqualiserHI MID Auxiliaries PREDIR LCR Routing and Status PANMono Meter Safe CUEFader Mute GroupLine Input Connectors and PIN AssignmentsMIC Input Insert SendVCA Input Module EXT VCA/MUTE Group 1 AssignExternal VCA Fader Control Wiring CUT Phase ReverseStereo Effect Return Module WidthHF EQ LF EQBAL MONO/STEREOVCA/MUTE Group Connectors and PIN Assignments Mono Subgroup Output Module CUE/SOLO Matrix MeterGroup Meter SUB/LCR Matrix Send PREConnectors and PIN Assignments Stereo Subgroup Output Module CUE/SOLO BAL Connectors and PIN Assignments LCR Subgroup Output Module Group Meters L, C, R VCA/MUTE Group 1 Assign Connectors and PIN Assignments Foldback Master Module 1 LevelAuxiliary Master Module HEADPHONES/HEADSET OutputsHeadphones Level AUX 1 LevelStereo Master Module GENERATOR/TALKBACK Assign Matrix Internal SINEWAVE/NOISE GeneratorOSC GroupsMonitor Level Monitor SectionTape DIMTrim CUE ResetCUE/SOLO Master Section PFL/AFL CUE IntlkLevel Talkback SystemTone Comms onMono CUE/SOLO Master Output Control PRETo Mono FadersMaster Connector Panel VCA Master Module Q2 Operationand Maintenance Manual BAL VCA Master Section CUT VCAConnectors and PIN Assignments Audio Master Module Q2 Technical Description Q2 Operationand Maintenance Manual Q2 Operationand Maintenance Manual Q2 Operationand Maintenance Manual Auxiliary Master Module Foldback Master Module Solo System Signal PathReset Circuit Q2 Operationand Maintenance Manual Q2 Panning ON/CUT Circuit Midi Interface Q2 Routing Input Module ResistorsInput Module Routing Links Level MeterInput Module Links Mono Group Output Module Mono Group Output Links Stereo Group Output Module Stereo Group Output LinksLCR Group Output Module LCR Group Output LinksQ2 VCA Input ModuleInput SUB Board Links Output SUB Board Links AdjustmentsOutput Module VCA Master Modules Q2 Operationand Maintenance Manual Q2 Operationand Maintenance Manual