Telex Q II - FOH specifications General Information, Left Centre Right

GENERAL

INFORMATION

Three channel or Left, Centre, Right panning differs from the normal stereo panning arrangement in that where the conventional left/right pan moves the signal across the stereo image, LCR panning moves the mono signal across three distinct positions. Using LCR panning gives a more spatial effect, offers more control over vocal and effects positioning, and brings theatre performances to life in a way that conventional stereo panning cannot.

In the LCR mode, the pan pot acts as follows. When panned hard left, the signal is only fed to the left channel of the main output (or sub-group). As the pan is rotated towards the centre, the signal to the left decreases, and the signal to the centre channel increases until at dead centre the signal only goes to the centre output. At this point, no signal is fed to the right channel at all.

LEFT CENTRE RIGHT

Rotating the pan pot further (to the right) decreases the centre feed while the right feed increases until at full clockwise rotation the signal is only on the right channel.

Q2 OPERATIONAND MAINTENANCE MANUAL 9601 4