Telex Q II - FOH specifications LCR Subgroup Output Module, Mono

LCR SUBGROUP OUTPUT MODULE

The LCR Subgroup Output module has three outputs (for the left, centre and right outputs from each group). It may be used with either the normal input module or the dedicated LCR input module.

The module comprises the LCR Group control and output (lower part of module) and a mono Matrix mixer section (upper part of module). Each module has controls for inputs to the Matrix mixer ie they are not feeds from that group to the matrix buses, but feeds from the groups etc to the matrix.

F/B 1/3

Adjusts the level of the Foldback 1 master output (or 3) fed to the Matrix bus on the module. This may be used to feed a global mix set-up on the F/B 1 bus to any of the 8 matrix outputs.

F/B 3 (switch)

Selects the Foldback output 3 to the matrix instead of F/B 1.

F/B 2/4

Adjusts the level of the Foldback 2 master output (or 4) fed to the Matrix bus on the module.

F/B 4 (switch)

Selects the Foldback output 4 to the matrix instead of F/B 2.

L/R

Adjusts the level of the summed (mono) signal from the main stereo left and right outputs fed to the Matrix on the module.

MONO

Adjusts the level of the main Mono (centre) signal from the main mono output fed to the Matrix on the module.

1

Adjusts the level a summed mono signal of the post-fader LCR Group A (1) signal input to the Matrix. Similarly for Controls 2-4 for LCR Group signals B, C and D (2 to 4).

Q2 OPERATIONAND MAINTENANCE MANUAL 9601 44