CUE/SOLO MASTER SECTION PFL/AFL
Selects the Cue/Solo mode to be PFL, or AFL when the switch is depressed.
TRIM
Adjusts the level of the Cue/Solo signal, most useful in the PFL mode.
CUE INTLK
Interlock mode selection. In normal mode, Cues are additive. That is any number of Cue buttons may be pressed and the signals will be added. In INTERLOCK mode, only one Cue may be active at any time, so pressing a Cue will automatically cancel the previously selected Cue.
CUE I/P
Indicates that an input CUE is pressed. Inputs take priority over outputs in normal mode, so pressing an input CUE will suspend an output CUE until the input is released.
CUE O/P
Indicates that an output CUE is pressed. This led will extinguish if an input CUE is pressed while an output CUE is already active.
CUE RESET
Clears all pressed CUE buttons.
Q2 OPERATIONAND MAINTENANCE MANUAL 9601 | 53 |